Page 1 of 18 12311 ... LastLast
Results 1 to 15 of 270

Thread: MRP 7age/9age 1900cc Stroker Kit

  1. #1
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default MRP 7age/9age 1900cc Stroker Kit

    MRP 7a (aka 9age) Stroker Kit

    After huge request we have designed a 7age/9age stroker kit (1900cc).
    This will not be your generic stroker kit with bad rod/stroke ratios
    (Others on the market use OEM style 4age pistons with shorter rods which brings the rod/stroke ratio down to 1.44 which is less than ideal in the modern world of building a good reliable engine!)

    The pistons in this kit are a special custom design where we worked with CP to get what we needed.
    Rod/stroke ratio is 1.52:1

    Custom MRP 90mm Billet 4340 Crank based on the TRD/Atlantic Crank Design
    8 Bolt to take 4age flywheels
    OEM 4age journal sizes so you can use the OEM 4age size bearings
    Oversize oil gallery holes which allows more oil to pass through the bearings
    Oil gallery chamfer lead in/out which aids in flowing the oil in/out of the gallery holes
    Oil gallery feeds are the same as the 4age crank meaning constant 360 degree of oil supply to the journals at all times unlike the 7afe crank.
    Large counter weights to dampen harmonics at high RPM,
    Dual crank sprocket keyway for those wanting to run this option.

    Custom MRP Billet 4340 conrods with ARP 2000 bolts
    Around 6% longer than the 7a rods
    I-Beam & H-beam available
    I-beam being the stronger but heavier of the 2 (These are like Argo Rods)
    H-beam is similar to Eagle, Spool etc.
    Rods are notched on the journals which acts as an oil squirter up into the bottom of the piston

    Custom MRP Forged Pistons by CP
    Low compression height, 20v & 16v available in both N/A & Turbo to any compression you require.
    Rings & gudgens supplied

    Power rating of the kit 800hp+ & 10,000rpm+

    $3750NZD

    Notes
    Must be used with a 7afe block
    No modifying of the block is required

    If your fitting oil squirters into the block from a 4age engine and worried about clearance, the crank has been designed to clear the oil squirters.
    Takes 4age flywheels









    Last edited by Bazda; 21-05-2013 at 11:30 AM.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  2. #2
    Toymods Events Secretary Too Much Toyota trdee's Avatar
    Join Date
    Jul 2007
    Location
    NSW
    Posts
    10,243

    Default Re: 7age/9age 1900cc Group Buy!

    will this require "clearancing" of the block or any other shenanigans of the sort? 3k for the full setup is bullshit cheap...

    any ideas on power and RPM ratings?

    also will we be able to specify whatever comp ratio we want?

    edit - pending the above, count me in.
    Last edited by trdee; 02-09-2012 at 07:35 PM.
    1988 AW11 9A-GTE - Turbo Missile | 2004 Elise K20A - N/A Screamer | 1984 MA61 1JZ-GTE - 80s cruiser
    Quote Originally Posted by Rex_Kelway View Post
    .....and the within first laps everything that made the AW11 great hit Rex as if the 'Gods of driving fun' had all Jizzed on his face.....
    Quote Originally Posted by JustenGT8 View Post
    Mono blocs mate....as close to yours as a Ferrari is to a Fiesta

  3. #3
    Junior Member Too Much Toyota dnegative's Avatar
    Join Date
    Oct 2009
    Location
    NSW
    Posts
    5,486

    Default Re: 7age/9age 1900cc Group Buy!

    Fuck that's bullshit cheap, you would easily pay that for a regular 4AGE kit

  4. #4
    Forum Member Grease Monkey
    Join Date
    Aug 2012
    Location
    Vic
    Posts
    60

    Default Re: 7age/9age 1900cc Group Buy!

    what is the pistons comp height for this kit? you can go for 25mm c-c like on Ninja zx14r to help rod length.
    incredible price!!!

  5. #5
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: 7age/9age 1900cc Group Buy!

    Quote Originally Posted by trdee View Post
    will this require "clearancing" of the block or any other shenanigans of the sort? 3k for the full setup is bullshit cheap...

    any ideas on power and RPM ratings?

    also will we be able to specify whatever comp ratio we want?

    edit - pending the above, count me in.
    Yes you will be able to specify the comp ratio you want.
    The kit will be designed to handle over 800hp if needed.
    RPM ratings - thats up to how game you are! but should easily be around 9000rpm capable.

    Quote Originally Posted by liteace View Post
    what is the pistons comp height for this kit? you can go for 25mm c-c like on Ninja zx14r to help rod length.
    incredible price!!!
    Piston comp height is the key in this kit and the pistons will be a special design. And yes its gona be tiny!
    The rod length we are using is around 6% longer than the stock 7a rods.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  6. #6
    Building Corollas Chief Engine Builder Cuzzo's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    4,626

    Default Re: 7age/9age 1900cc Group Buy!

    Subscribbled
    KE30 4agte - Bullet - Rick Rolled
    UZX83 1UZ W58- Cruiser - Tow Car - Fun Car
    Quote Originally Posted by -GT- View Post
    You had an oil and plastics engine bay fire, with flames that reached at least to the roof - of course shit got hot, it wasn't burning jiffy firelighters back there.

  7. #7
    Forum Member 1st year Apprentice
    Join Date
    Mar 2010
    Location
    Mississippi
    Posts
    19

    Default Re: 7age/9age 1900cc Group Buy!

    Count me in for a kit !! Just hope it makes it here before Christmas !!

    wrenchdad

  8. #8
    Toymods Events Secretary Too Much Toyota trdee's Avatar
    Join Date
    Jul 2007
    Location
    NSW
    Posts
    10,243

    Default Re: 7age/9age 1900cc Group Buy!

    Quote Originally Posted by Bazda View Post
    Yes you will be able to specify the comp ratio you want.
    The kit will be designed to handle over 800hp if needed.
    RPM ratings - thats up to how game you are! but should easily be around 9000rpm capable.



    Piston comp height is the key in this kit and the pistons will be a special design. And yes its gona be tiny!
    The rod length we are using is around 6% longer than the stock 7a rods.
    consider me to be in at this stage then. ill let some other people know who might also be keen

    will keep the money ready and waiting
    1988 AW11 9A-GTE - Turbo Missile | 2004 Elise K20A - N/A Screamer | 1984 MA61 1JZ-GTE - 80s cruiser
    Quote Originally Posted by Rex_Kelway View Post
    .....and the within first laps everything that made the AW11 great hit Rex as if the 'Gods of driving fun' had all Jizzed on his face.....
    Quote Originally Posted by JustenGT8 View Post
    Mono blocs mate....as close to yours as a Ferrari is to a Fiesta

  9. #9
    SC14'd Member Domestic Engineer nick.parker's Avatar
    Join Date
    Nov 2005
    Location
    Canterbury
    Posts
    660

    Default Re: 7age/9age 1900cc Group Buy!

    Ok....I'm in too.
    I was already in the process of getting prices for custom rods and pistons to make a 1.6:1 rod / stroke 7AFE with standard stroke. But no point now
    == 4AGZE SC14 Supercharged ==
    Now flogg'n the SC14 @ 18psi....

  10. #10
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: 7age/9age 1900cc Group Buy!

    We have pretty much sorted the crank and rods.
    Just working on piston designs with some usa companies (JE, Wiseco, Cp & Ross).
    Once they are confirmed we will be taking deposits.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  11. #11
    Junior Member Domestic Engineer
    Join Date
    Dec 2005
    Location
    Top End
    Posts
    573

    Default Re: 7age/9age 1900cc Group Buy!

    Hey Bazda who is making the billet cranks ? do they do one offs for other motors
    Once apon-a-time world famous Photochopper

    http://zammothechoppa.deviantart.com/ : )

  12. #12
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: 7age/9age 1900cc Group Buy!

    Quote Originally Posted by Zammo View Post
    Hey Bazda who is making the billet cranks ? do they do one offs for other motors
    We cant do one offs, there is a minimum buy.
    Whos making them. We have a few suppliers in mind but not settled on 1 yet.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  13. #13
    Junior Member Domestic Engineer
    Join Date
    Dec 2005
    Location
    Top End
    Posts
    573

    Default Re: 7age/9age 1900cc Group Buy!



    one off billet cranks are expensive and no one makes them

    Once apon-a-time world famous Photochopper

    http://zammothechoppa.deviantart.com/ : )

  14. #14
    Building Corollas Chief Engine Builder Cuzzo's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    4,626

    Default Re: 7age/9age 1900cc Group Buy!

    I'm in bazda
    KE30 4agte - Bullet - Rick Rolled
    UZX83 1UZ W58- Cruiser - Tow Car - Fun Car
    Quote Originally Posted by -GT- View Post
    You had an oil and plastics engine bay fire, with flames that reached at least to the roof - of course shit got hot, it wasn't burning jiffy firelighters back there.

  15. #15
    That's me before i was a Conversion King -GT-'s Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,445

    Default Re: 7age/9age 1900cc Group Buy!

    Don't mind me, just subscribing and going back to lurking while i try and figure out how i could possibly justify this... (it's unlikely, so don't count me in just yet)
    AE93 SX 20V - Next Wakefield track day is 13th of November 2015!
    1:15.47 at Wakefield Park | 1:59.45 at Eastern Creek GP | 1:08.81 at SMP South | 2:04.77 at Phillip Island
    Toymods Club Member

Similar Threads

  1. 7age: how to?
    By iflylo in forum Tech and Conversions
    Replies: 138
    Last Post: 03-12-2015, 07:02 AM
  2. 9age??
    By Bazooka in forum Tech and Conversions
    Replies: 39
    Last Post: 06-10-2012, 07:44 PM
  3. 7age 20v stroker?
    By 13anshee in forum Tech and Conversions
    Replies: 6
    Last Post: 29-08-2011, 09:03 AM
  4. 20v BT head on a 7AGE
    By chadix24_7 in forum Tech and Conversions
    Replies: 12
    Last Post: 09-03-2006, 09:00 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •