Results 1 to 12 of 12

Thread: W58 Hydraulic Throwout bearing

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Apr 2011
    Location
    Victoria
    Posts
    10

    Default W58 Hydraulic Throwout bearing

    I'm looking for some advice on what types of hydraulic clutch throwout bearings will fit a W58 5 speed gearbox adapted to a 1UZFE. I have a part number for the howe bearing but am wondering what other bearings can be used. I've heard that quartermaster also make a part but can't seem to find a part number. Also a place where they can be purchased here in Aus. Thanks

  2. #2
    Junior Member Too Much Toyota
    Join Date
    Sep 2005
    Location
    Qld
    Posts
    5,590

    Default Re: W58 Hydraulic Throwout bearing

    JustCallMeOrlando would be one person to speak to? his UZA80 uses a T56 gearbox but he went the hydraulic throwout bearing.

    Otherwise, try Ed's V-8 site: http://www.v-eight.com/
    ------------------------------
    ST185 road barge / MZ11 forest barge / RA65 garage barge

  3. #3
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: W58 Hydraulic Throwout bearing

    Ed should have drawing that you can buy off him...
    Uses a Tilton1600 I believe...

    Or shouldn't be too hard to sort out similar yourself

    I have a feeling there is also a cheaper hydraulic throwout that others have used, JCMO springs to mind as someone who has used it





    Cheers
    Wilbo
    Wilbo's Wiki (Includes 2JZ-GTE Wiring, etc! )

    Wilbo's JZA80
    Wilbo's JZZ12

  4. #4
    Junior Member Backyard Mechanic manny's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    205

    Default Re: W58 Hydraulic Throwout bearing

    Here is the Howe 82870 we ran with a SKF VKC3511 \ NTN SFO914 \ NSK GSB319 type round face bearing between our W58 and 1UZ
    GSE20 IS250 - daily
    UZZ30 Soarer - 1UZ-FE/R154/Adaptronic - trackday roughie
    UZZ32 Soarer - Active Hydropneumatic Suspension (A-SUS) & Active Four Wheel Steering (A-4WS) - cruiser

  5. #5
    Breaker OfThe Unbreakable Backyard Mechanic Herus's Avatar
    Join Date
    Feb 2007
    Location
    SA
    Posts
    310

    Default Re: W58 Hydraulic Throwout bearing

    The guys from The Cartune Company in NZ use one from a Ford Mondeo.

    Im yet to look into it, as I need one myself.

    Herus
    Member's ride thread!

    Joined Team BHG, 19/7/2008

    Joined Team JZX83, 15/11/08

  6. #6
    Junior Member Automotive Encyclopaedia
    Join Date
    Nov 2005
    Location
    Melbourne Victoria
    Posts
    941

    Default Re: W58 Hydraulic Throwout bearing

    the howe 1 seems to be 1 of the better 1s out there and are cheap on ebay

  7. #7
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: W58 Hydraulic Throwout bearing

    Quote Originally Posted by Celica RA45 View Post
    the howe 1 seems to be 1 of the better 1s out there and are cheap on ebay
    Yep I'm pretty sure that was the 'cheaper' one I was thinking of!

    Cheers
    Wilbo
    Wilbo's Wiki (Includes 2JZ-GTE Wiring, etc! )

    Wilbo's JZA80
    Wilbo's JZZ12

  8. #8
    Breaker OfThe Unbreakable Backyard Mechanic Herus's Avatar
    Join Date
    Feb 2007
    Location
    SA
    Posts
    310

    Default Re: W58 Hydraulic Throwout bearing

    Member's ride thread!

    Joined Team BHG, 19/7/2008

    Joined Team JZX83, 15/11/08

  9. #9
    Estranged Member Chief Engine Builder mullett's Avatar
    Join Date
    Jan 2006
    Location
    WA
    Posts
    3,369

    Default Re: W58 Hydraulic Throwout bearing

    Yup, I've had a Howe (from summit) for 20,000 km or so. Beware that you will need to get a larger master cylinder (5/8 is not enough!).

    Also, don't buy the Howe line kit! It's shit.

    Be aware that by the time you get the bearing, lines, larger master etc, it will cost you as much as a conversion bellhousing, and takes some work to get right. If I had my time again, I'd buy a bellhousing and be done with it.

  10. #10
    Breaker OfThe Unbreakable Backyard Mechanic Herus's Avatar
    Join Date
    Feb 2007
    Location
    SA
    Posts
    310

    Default Re: W58 Hydraulic Throwout bearing

    What Bellhousing would you go for mullett?
    Member's ride thread!

    Joined Team BHG, 19/7/2008

    Joined Team JZX83, 15/11/08

  11. #11
    Low rep Grease Monkey
    Join Date
    Apr 2010
    Location
    bkk
    Posts
    115

    Default Re: W58 Hydraulic Throwout bearing

    intersting information

  12. #12
    SPANNER CRAB Grease Monkey AE3SGTE's Avatar
    Join Date
    Jul 2007
    Location
    QLD
    Posts
    100

    Default Re: W58 Hydraulic Throwout bearing

    I'm using a different Howe unit, although has the same part number 82870?
    Its says is designed to be used with 3/4" master cylinder.


    Looks like I have the exact same adapter as manny!

Similar Threads

  1. W58 Throwout bearing
    By Teckool in forum Tech and Conversions
    Replies: 10
    Last Post: 03-12-2008, 02:06 PM
  2. 1jz/w58 throwout bearing
    By Rorge in forum Tech and Conversions
    Replies: 4
    Last Post: 07-12-2006, 01:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •