Sounds like your bolt is imperial then. Normally metric has M12 then it skips to M14.
You have a 1/2" bolt by the sound of it.
try an M12
Can anyone confirm what the thread pitch and size is for gen1 3SGE motor? I can't get what I think is the right bolt to go in more than a turn. Not sure if the threads are slightly munted or I have the wrong bolt.
The bolt I have appears to be M13 and pitch of 1.5mm.
Tia, chuck.
Sounds like your bolt is imperial then. Normally metric has M12 then it skips to M14.
You have a 1/2" bolt by the sound of it.
try an M12
M12 def too small. Already tried.
In any case I suck at measuring (and zeroing my calipers) ... bolt is an M14.
Bookmarks