Results 1 to 3 of 3

Thread: ms123 crown 7mgte w58 manual gearbox conversion

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Jul 2010
    Location
    QLD
    Posts
    8

    Default ms123 crown 7mgte w58 manual gearbox conversion

    I am purchasing an na ma70 w58 gearbox, tailshaft, diff and driveshafts, clutch master cylinder and pedal box.
    Can anyone tell me if the pedal box and clutch mastercylinder will fit?
    or whch one will?
    also will the tailshaft fit? i dont think the diff will fit either ive been told its mechanical lsd? same as the mx83?

    cheers, Ben.

  2. #2
    Forum Member 1st year Apprentice
    Join Date
    Jul 2010
    Location
    QLD
    Posts
    8

    Default Re: ms123 crown 7mgte w58 manual gearbox conversion

    ok so going off my guess that a ms123 is the same as a mx73 i found that an ae86 pedalbox will fit can anyone confirm this?

  3. #3
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: ms123 crown 7mgte w58 manual gearbox conversion

    Diff in MS123 is a little special in regards to bolting if I recall, nothing I know of is a direct bolt in... I thought they ran and F series tho? I might be wrong, not my real area of knowledge

    Have you thought of checking www.toyodiy.com for part number for clutch pedal etc? Cost from Toyota might not be too bad?

    In regards to master cyl, Toyota seem to use the same clutch master in most of that vintage car, same as RA6x celica, etc.

    Cheers
    Wilbo
    Wilbo's Wiki (Includes 2JZ-GTE Wiring, etc! )

    Wilbo's JZA80
    Wilbo's JZZ12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •