Results 1 to 5 of 5

Thread: Exhaust and intercooling for HR

  1. #1
    Junior Member Grease Monkey
    Join Date
    Jun 2009
    Location
    Victoria
    Posts
    164

    Default Exhaust and intercooling for HR

    Hey guys.

    Next year my gt-four st165 becomes eligible for club rego to start some non serious fun track work!! very pumped.

    I am currently building up the car and i am wondering what to do in terms of my intercooler and my exhaust set up.

    I realise this may vary from club to club but im talking in general, if these modifications should be made before i go for club rego or if i do them afterwards?

    Intercooler wise.. I'm changing from a stock top mount WTA to a FMIC in general is this fine for club rego?

    also upgrading my dump pipe from the big heavy restricting toyota pipe to a 3 inch dump. but doing this im effectively removing the cat. But would this pass club rego?

    these are both modifications that i would really like to make, so if any club allows this then im in lol

    Thanks guys
    90' GT-Four ST185 RC motor ST205 gearbox!
    New installs Ct20B and Rear Strut Brace!!
    Next to come;
    3SGE cams, Fidanza Adj Cams, WolfKatz fuel rail!!

  2. #2
    Junior Member Too Much Toyota oldcorollas's Avatar
    Join Date
    Aug 2005
    Location
    sydney
    Posts
    12,496

    Default Re: Exhaust and intercooling for HR

    afaik, Vic club rego is totally different to NSW Historic rego.
    perhaps ask in the "changes to Vic rego" thread in this section?
    "I'm a Teaspoon, not a mechanic"
    "There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)

    AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!

  3. #3
    Junior Member Automotive Encyclopaedia
    Join Date
    Apr 2007
    Location
    Vic
    Posts
    890

    Default Re: Exhaust and intercooling for HR

    The only issue i think you would have is no CAT, which is also an EPA issue too, so i would just get a dump made up with a CAT, saves any dramas plus a lot cheaper too as i beleive EPA Fines for no CAT's are extrememly Expensive ..

  4. #4
    I am crap as a Conversion King SilverRA23's Avatar
    Join Date
    Oct 2005
    Location
    VIC
    Posts
    2,144

    Default Re: Exhaust and intercooling for HR

    I have some good news and some bad news.

    Good news - First off a FMIC and an exhaust modification would be fine for club rego here in Victoria, with our club any way.

    Bad news - Taking the cat convertor out would not be a good thing and would be something that I think our club inspectors would like to see remain. As mentioned above, the EPA fine will hurt like a mofo too.
    Now - RA23-WRX
    Gone-KE10-KE15-KE35-TA22-AE71-Charade-AE82-MS47-KE15-AE95-MX32
    Need club rego or a CAMS licence in VIC? Join TCCAV www.tccav.org.au

  5. #5
    Forum Member
    Join Date
    Aug 2016
    Location
    vietnam
    Posts
    2

    Default Re: Exhaust and intercooling for HR

    Good news - First off a FMIC and an exhaust modification would be fine for club rego here in Victoria, with our club any way.

Similar Threads

  1. Turbos 101
    By WeekendWarrior in forum Tech and Conversions
    Replies: 5
    Last Post: 24-01-2007, 07:23 PM
  2. intercooling 1ggte on gas carb
    By love ke70 in forum Tech and Conversions
    Replies: 62
    Last Post: 28-03-2006, 07:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •