Looking for a standard AE86 brake master cylinder (same diameter as original). Can't get one anywhere, nor a seal kit.
Anyone know of an equivalent that will bolt straight on to the AE86 booster?
PS: I don't want to go larger diameter just yet, will do that when I upgrade brakes.
Don't force it... use a larger hammer.
If it breaks, it needed replacing anyway.
--------------------------------------------------------
Henk
http://cgi.ebay.com/ebaymotors/TOYOT...Q5fAccessories
I bought one a while back. It was an OEM one with the asco name ground off. Only issue is that the brake line out of the nose goes upwards rather than straight out, which is an easy thing to fix. And the loom plug on the low fluid warning is a different type, just need to swap over to yours. It bolts onto the booster via the ADM pattern.
Mine has a JDM master / booster in which the master bolts onto the booster in a diagonal pattern. What I did was strip out the new one of all parts, seals, pipes, reservoir etc and installed them into my jap body after honing the cylinder.
Cam mountain I feel different from the ordinary
Bookmarks