Hi All,
Since i dont have my EPC installed anymore im kind of at a stuck point finding all the bits I need to do a complete rebuild of my SW20 Suspension.
Im chasing Toyota part numbers on
- Complete bushing replacement kit (inc tie rod ends + sway bar bushings)
(..and anything im missing here in replacing suspension parts. i already changed my shocks and springs to koni's + kings about 7000km ago, now i just need to do everything else to the suspension).
- Ball Joints / CV Joints or whatever theyre called in the SW20
(i can hear them crack when i go down a ramp and over a bump when weight is on the front end of the car. i wonder, do these have steering bushes/steering rack joints that need replacing too in a non-power steering MR2?)
any help appreciated!
Ta
Chris
B7 2005.5 Audi A4 2.0TFSI Quattro Turbo Keepin' My Pimp Hand Strong
GDB 2003 Subaru Impreza WRX Stock and Unmolested!
JZZ20 1988 Soarer GT Twin Turbo 1JZ-GTE + R154 + LSD | Black Knight Still being Assembled
JZX90 1993 Mark II Tourer V 1JZ-GTE + A340E | 270rwhp
Z20Soarer.Org - The definitive resource for all xZ20 Owners.
I'm on the same boat here!
but i've got a 1991 MR2 so the bits are slight different due to the control arms etc.
Btw how does a non ps mr2 feel? how quick is the response on the rack?
Bookmarks