Results 1 to 4 of 4

Thread: Vacuum / ideling prob 3sgte

  1. #1
    Junior Member Grease Monkey
    Join Date
    Apr 2008
    Location
    Victoria
    Posts
    83

    Default Vacuum / ideling prob 3sgte

    Hey everyone.
    Having some dramas with the 3sgte in my gt4, heres the story..

    LAst september ran her at the drags and ran fine, about a week later took the car out for a drive on the highway and all seemed fine untill i got back into town and pulled up at some traffic lights, car was ideling like crap and i could hear sucking and my boost / vac guage was reading about 17in hgs, usually it runs around 20 in hgs.

    so after 6 months of laziness i finally started trouble shooting and along the way found my tvis actuator was shagged and subsequently blocked it off and removed the vsv for that and the turbo and the blue cannister, still no good.

    Sprayed degreaser anound the manifold which lead to a pick up in revs and vacuum so the inlet manifold went for machining and the tvis plates where gutted.

    Fast forward to now, manifolds back on and not leaking but the car still (acording to my guage and ear) has a vacuum leak, its not sitting at 16in hgs, when you rev the engine it sounds like its running on three cylinders and is running richer than normal and for some reason my engine light stays on but when i try to run diagnostics no code comes up..also it seems to be making more valve train noise than usual but i was putting this down to it not running right.

    sorry about the long post but i really need a point in the right direction.

    thanks guys and gals
    1990 Aus Delivery ST185R
    1997 ST215W
    1990 ST184R
    2003 ZZE123
    2004 Lux

  2. #2
    dont work in my backyard Domestic Engineer pandaah's Avatar
    Join Date
    Aug 2009
    Location
    WA
    Posts
    648

    Default Re: Vacuum / ideling prob 3sgte

    id try sprayin more around the inlet manifold and associated components as it sounds like you still have a vacuum leak, for example around the injector seals, throttle body gasket etc..

    would explain the engine light too sometimes they go funny with vacuum leaks like the o2 sensor will log a rich running or lean running etc..

    also, for shit and giggles have you checked the condition of the air filter and spark plugs?

  3. #3
    Junior Member Grease Monkey
    Join Date
    Jun 2009
    Location
    Victoria
    Posts
    164

    Default Re: Vacuum / ideling prob 3sgte

    is it a gen 2?? id be checking the intake hoses the 1 on the turbo always splits.. give u shit drivability and affect vacuum..

    AFM doesnt like extra air.. good luck
    90' GT-Four ST185 RC motor ST205 gearbox!
    New installs Ct20B and Rear Strut Brace!!
    Next to come;
    3SGE cams, Fidanza Adj Cams, WolfKatz fuel rail!!

  4. #4
    Junior Member Grease Monkey
    Join Date
    Apr 2008
    Location
    Victoria
    Posts
    83

    Default Re: Vacuum / ideling prob 3sgte

    Thanks for the replies guys, turns out i had a dodgy fuel injecter connection.

    Runs like a sweet thing now
    1990 Aus Delivery ST185R
    1997 ST215W
    1990 ST184R
    2003 ZZE123
    2004 Lux

Similar Threads

  1. 3sgte Limits???
    By Douglas Black in forum Tech and Conversions
    Replies: 138
    Last Post: 30-11-2013, 11:33 PM
  2. TUTORIAL: How to build a 'cheap' 5S-GE motor from 5S-FE
    By bajachris88 in forum Tech and Conversions
    Replies: 9
    Last Post: 21-07-2010, 10:15 PM
  3. Any one have a prob with Fuel Cut on 3sgte?
    By Poggy in forum Tech and Conversions
    Replies: 0
    Last Post: 22-03-2007, 03:32 PM
  4. 20V Brake Booster Vacuum Problems
    By ShiRi in forum Tech and Conversions
    Replies: 10
    Last Post: 15-12-2005, 08:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •