for 7M? I drilled mine at 70mm and 80mm but was a little tight getting over the studs, but i tried to drill the holes half a mm over stud size.
Edit: I think the hole is just over 50mm
hello guys
Need to know the dimentions from bolt hole to bolt hole also size around of flange and side of hole in the middle.
1992 - JZA70 STOCK - SOLD
for 7M? I drilled mine at 70mm and 80mm but was a little tight getting over the studs, but i tried to drill the holes half a mm over stud size.
Edit: I think the hole is just over 50mm
Last edited by Supra967; 15-04-2010 at 08:32 AM.
its not in square dimension. if it is CT26A from 7MGTE, it was 70mm X 80mm. the round manifold entry is 60mm. so i just remember it as 60mm-70mm-80mm.. 70mm and 80mm is for the bolt holes...
Bookmarks