need help with 2jz install

**carmsbody** · 25-09-2009, 04:26 PM

heres the issue.

2jzge auto engine
2jzge auto loom
2jzge manual ecu (with neutral switch and reverse switch mod)

car wont start....why?? its like the immobiliser is armed, i can hear a relay click but thats all. got all the dash lights.

if you got nothing on tonight i would really appreciate the help. (brisbane)

**skin** · 25-09-2009, 04:53 PM

more info man, got spark, injectors clicking? cranking over etc.

What wiring diagram did u use i really need one, cheers

**carmsbody** · 25-09-2009, 04:55 PM

op edited. its not doing anything at all

**Shakotan_Aaron** · 25-09-2009, 08:48 PM

battery good?

earth from the engine to chassis good and clean?

all battery terminals can + and - clean to starter and body?

is the box actually in park/neutral?

will the motor turn over by hand with socket on crank pulley?

failing all those,

try bridging a wire from the solenoid strait to the batt this will at least tell you if its a fault with the starter..