Results 1 to 3 of 3

Thread: RA28 Dash Measurement

  1. #1
    Junior Member Backyard Mechanic Sigmeister's Avatar
    Join Date
    Dec 2005
    Location
    SA
    Posts
    202

    Default RA28 Dash Measurement

    I am after a quick favour. I just need the measurement from the bottom of the centre console to the bottom of the 3 guage cluster. I am looking to install a 7 inch screen in the console and 2 x 1 DIN units above the screen but below the guages. I have the individual parts, but no car to measure the exact height.
    I know it will be a tight squeeze, but think it might fit.

  2. #2
    Junior Member Backyard Mechanic Sigmeister's Avatar
    Join Date
    Dec 2005
    Location
    SA
    Posts
    202

    Default Re: RA28 Dash Measurement

    So......no one with a 28 has a ruler?
    I would take photos to explain, but Barned01 has my camera taking photos of his callipers

  3. #3
    Junior Member 1st year Apprentice
    Join Date
    Nov 2005
    Location
    Victoria
    Posts
    28

    Default Re: RA28 Dash Measurement

    Hey man

    saw the tread yesterday and though ill do it in a sec although forgot...sorry

    300mm from the bottom of the 3 gauge cluster to the curve where the gear shift panel starts

    Hope this helps
    "If you can see Chuck Norris, he can see you. If you can't see
    Chuck Norris you may be only seconds away from death."

Similar Threads

  1. Voltage reg on an RA28 for 1g conversion.
    By thomasbl in forum Tech and Conversions
    Replies: 1
    Last Post: 27-03-2006, 01:03 PM
  2. 1G-GTE into RA28 : Dash gauges.
    By NoYesWhy in forum Tech and Conversions
    Replies: 10
    Last Post: 25-03-2006, 12:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •