Ta22 Rear quater badge placement

[Killa_Ta22]

Hi everyone, i've recently bought some

cursive celica badges and the blue dragon badges (as pictured)


my celica has had its badge holes bog'd up and i want an exact placement to place the badges.

Im asking if anyone has created a stencil of some sort or something like that so i can get the correct location to put the badges in place,

Thanks

[fade-e]

mate the easiest way is to remove the rear quarter trim and see where the holes are. from there do the following...

1) get a scraper and scrape the extra bog that is sticking out of the hole
2) get some race tape and tape the outside of the car
3) get a drill and drill the hole out from the inside
4) put the badges in

the tape from the outside will ensure that the paint wont crack and come off

cheers

[LT1986]

...grab a fridge magnet and go happy hunting for the bog build up!

[hemi twofifteen turbo]

Had this same problem before, I removed the rear door trims and you'll be able to see little worms of bog where the holes where. Drill and done!

[Killa_Ta22]

Thank you so much fellas!!!!!! i didnt even think of that! so silly

Cheers