3sge beams and 3rd generation parts compatiblity: sump and exhaust headers

[brucey]

I'm researching into whether or not some of the parts from a 3sge beams engine (sxe10 Altezza) is compatible with a 3rd generation 3sge. Looking into putting a 3sge 3rd generation engine into a rear wheel drive corolla (ke30).

Can anyone confirm if a 3sge beams oil pan would fit?

Here are some links to performance parts for reference-

ARC oil pan upgrade (increased capacity):
http://www.nengun.com/arc/oil-pan-upgrade

Greddy oil pan upgrade kit:
http://www.nengun.com/trust-greddy/oil-pan-upgrade-kit

Also, would 3sge beams exhaust headers fit?

HKS racing header:
http://www.nengun.com/hks/racing-header

http://page19.auctions.yahoo.co.jp/jp/auction/x79979398

[Celica RA45]

the sump pan will fit as well as the alloy pan from a altezza 3sge but thats about it the exhaust is way different
but a 2s steel pan with oil pick up would do just as well
on those links the oil pan that s availible is onlky the bottom section its not a whole assembly by the way

[kanazai2001]

the sump pan will fit as well as the alloy pan from a altezza 3sge but thats about it the exhaust is way different
but a 2s steel pan with oil pick up would do just as well
on those links the oil pan that s availible is onlky the bottom section its not a whole assembly by the way

header:
will the 3rd gen 3SGTE turbo header fit red/black beams (screw pattern n gasket)?!

[Celica RA45]

exhaust for the beams altezza is way different to the gen 3 and 4 turbo motors st205 and st215 are the same as in exhaust patterns will not fit the beams

[brucey]

OK, thank you for your replies.
So are there any aftermarket rear wheel drive exahust headers for the 3rd generation 3sge engine, or the only option is custom made?

Can't really find much on the net, just custom:

http://www.danstoy.net/images/bernard-engine-big.jpg

http://www.danstoy.net/products.html

[Celica RA45]

it will have to be custom pipes

[78Rolla]

Unfortunantely the Beams exhaust wouldn't fit in my setup either - had to go with custom pipes....unless you've changed the steering setup on the '30. Seems a shame as toyota put a lot of R&D into that engine.

[kanazai2001]

exhaust for the beams altezza is way different to the gen 3 and 4 turbo motors st205 and st215 are the same as in exhaust patterns will not fit the beams

mean i hav 2 go for custom header 2 turbo charge my red black beams...
is there any cast-iron turbo header for red black beams like the 1 that japan TRIAL did?

[haris RA60]

hello guys,

i m into installing a 3rd gen 3sge in to a 1982 celica, thats a rear wheel drive celica so was changing the oil pan when got to know about the lines of oil filter.

needed some help regarding what should be done to those lines??

urgent help will be appreciated.

Regards

Haris