Results 1 to 13 of 13

Thread: indicators not flashing

  1. #1
    Junior Member 1st year Apprentice WeekendWarrior's Avatar
    Join Date
    Mar 2006
    Location
    new south wales
    Posts
    32

    Default indicators not flashing

    hey guys just wondering, i have an 85 hilux 4x4 2.0ltr and when u turn the indicators on they dont flash they just stay on, now iv replaced the flasher relay but its still doing the same thing hoping someone could shed some light on the subject. and also wondering if someone might have a wiring diagram for this model.

    cheers



    rob
    - Project "BILLYGOAT" the ta22 found on the edge of a hill




    BEARCON All your construction needs 67 624580

    THE CELICA SHOP COMING SOON

  2. #2
    Toymods Net Nazi Too Much Toyota river's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    7,061

    Default Re: indicators not flashing

    Hi,

    Check all the bulbs to make sure none are blown and they are all the same wattage.

    seeyuzz
    river
    The thinking man's clown and the drinking woman's sex symbol
    RA25GT - There is no substitute | 18R-G - Toyota's Dependable Masterpiece
    Toymods Car Club Treasurer, assistant Historic Plate Registrar & Forums Admin

  3. #3
    Junior Member Domestic Engineer
    Join Date
    Mar 2008
    Location
    inner west syd now!
    Posts
    582

    Default Re: indicators not flashing

    popped relay?
    Current: 94 jzs147 aristo, 92 ep82gt starlet
    Prev: ma61, gz20, jza70, uzz31, ncp10r, 92 sw20r
    And the winner of the big car race is......HOT ROD ZOIDBERG!

  4. #4
    Junior Member Backyard Mechanic KARNAGE's Avatar
    Join Date
    Sep 2006
    Location
    Qld
    Posts
    466

    Default Re: indicators not flashing

    i would be saying its a bulb somewhere in the system, does it do it no matter what side you put them on?

  5. #5
    Junior Member Automotive Encyclopaedia
    Join Date
    Apr 2007
    Location
    Vic
    Posts
    890

    Default Re: indicators not flashing

    Try playing with your Hazard switch, turn it on & off a few times, it may help ? ..

    Are you sure it was the flasher can for the indicators you changed & not the Hazards flasher can ? ..

  6. #6
    Junior Member Grease Monkey
    Join Date
    Oct 2006
    Location
    Victoria
    Posts
    67

    Default Re: indicators not flashing

    i think its a loose earth, or bung globe

  7. #7
    Junior Member 1st year Apprentice WeekendWarrior's Avatar
    Join Date
    Mar 2006
    Location
    new south wales
    Posts
    32

    Default Re: indicators not flashing

    all the globes are working and when i pulled the flasher out the indicators wouldnt come on at all ans yes it does it to both sides even when u turn the hazards on both sides come on but they dont flash they just stay on
    - Project "BILLYGOAT" the ta22 found on the edge of a hill




    BEARCON All your construction needs 67 624580

    THE CELICA SHOP COMING SOON

  8. #8
    Metal Guitarist 1st year Apprentice AE35's Avatar
    Join Date
    Feb 2006
    Location
    South Australia
    Posts
    33

    Default Re: indicators not flashing

    Check your earths to the indicator assemblies all around.
    1974 Toyota KE25 Corolla | Worked 5K | Twin Dellortos | Extractors | Sports Exhaust | - Memorial Car/Restoration Project/Weekend Car
    1994 Mitsubishi TS Magna | V6 | 5 speed | - Daily Driver

  9. #9
    Junior Member Grease Monkey
    Join Date
    Dec 2008
    Location
    south australia
    Posts
    97

    Default Re: indicators not flashing

    sounds like you've got a grounded wire somewhere that is causing the problem
    I'm an atheist but it's not my fault it's the way GOD made me

  10. #10
    ten years gone Backyard Mechanic frostyadonis's Avatar
    Join Date
    Jul 2008
    Location
    Victoria
    Posts
    288

    Default Re: indicators not flashing

    change the flasher can.
    in case you dont know where it is. under the dash harness area.
    manually make the indicators operate
    youll hear the can click
    gab it ,and feel it click
    remove it, replace it ( take the old one to the autoparts place to match it because some have 2 pin and some have 3 pin units)
    shouldnt be over $15

  11. #11
    Junior Member Automotive Encyclopaedia
    Join Date
    Apr 2007
    Location
    Vic
    Posts
    890

    Default Re: indicators not flashing

    If you read above, he has already done this ..

  12. #12
    ten years gone Backyard Mechanic frostyadonis's Avatar
    Join Date
    Jul 2008
    Location
    Victoria
    Posts
    288

    Default Re: indicators not flashing

    apologies i misread he wrote "flasher relay"
    i was looking out for flasher can. sooooooorrrry!

  13. #13
    Junior Member 1st year Apprentice WeekendWarrior's Avatar
    Join Date
    Mar 2006
    Location
    new south wales
    Posts
    32

    Default Re: indicators not flashing

    not a prop buddy thanx for the help guys
    - Project "BILLYGOAT" the ta22 found on the edge of a hill




    BEARCON All your construction needs 67 624580

    THE CELICA SHOP COMING SOON

Similar Threads

  1. TA22 indicators not working
    By joey in forum Tech and Conversions
    Replies: 6
    Last Post: 30-07-2008, 08:49 PM
  2. Indicators not working :( ...
    By Admiral coFF33 in forum Tech and Conversions
    Replies: 5
    Last Post: 09-07-2008, 09:22 AM
  3. "o/d off" Keeps flashing on dash
    By Z2TT in forum Tech and Conversions
    Replies: 19
    Last Post: 26-05-2008, 08:57 PM
  4. ECU error codes flashing through ABS light??
    By Alchemist in forum Tech and Conversions
    Replies: 6
    Last Post: 25-06-2006, 07:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •