g series diff flange

[stradlater]

So I sold my tailshaft including flange that joined onto my g-series diff.

I got another one off someone on here, and it doesn't fit? Are there different types?

[gianttomato]

There are at least two different types.

[stradlater]

f'ing yay

any idea how I might get my hands on another one?

[stradlater]

f'ing yay

any idea how I might get my hands on another one?

[cambelt]

A lot of people just redrill the holes in the diff flange .
Dave

[stradlater]

in the diff side? isn't that a bit unsafe though?

[ViPeR_NiPPleX]

she'll be right... a lot of people do it.

[stradlater]

I'll give you 'she'll be right....'

[Pure_In_Sanity]

I redrilled my rn41 flange at 45deg & it was fine.
Just remove it from the diff, as well as the tailshaft end. Clamp together & drill in a press (preferably)

Cheers
Phil

[The Real Roadrunner]

i have drilled them whilst still attached to the diff with no worries.

if you pull the flange off you will need to reassemble the whole lot with a new crush tube, probly an extra expense you don't want.

cheers
linden

[JZA70 R]

are you talking about the diff yoke?

[stradlater]

yeah, Diff Yoke.

I'd have to do it on the diff, I ain't got the skills or tools to pull the pinion face off.

[JZA70 R]

i have a spare from a jza70...

[stradlater]

is that likely to fit? and how much you want for it?

[JZA70 R]

i have no idea if it will fit. if you find it does feel free to make an offer.