Page 5 of 5 FirstFirst ... 345
Results 61 to 65 of 65

Thread: 3SGTE coil on plug conversion

  1. #61
    Junior Member Carport Converter OnAll-FOUR's Avatar
    Join Date
    Jan 2006
    Location
    NSW
    Posts
    1,608

    Default Re: 3SGTE coil on plug conversion

    Aus JD 2703 What ECU are you using and what are you triggering from? Just the standard dizzy signals?
    Ben #400 - My Ride Thread - Now with CT20b -
    1990 ST185 JDM, 103.0kws July 06 --> 155.9kws Feb 2010
    WSID: [email protected] (Weak ) : Wakefield 1:16.1 Racechrono
    Pics - http://photobucket.com Vids - http://www.youtube.com

  2. #62
    Junior Member Domestic Engineer
    Join Date
    May 2011
    Location
    Queensland
    Posts
    689

    Default Re: 3SGTE coil on plug conversion

    Standard dizzy with a varying trigger angle but around 60' and a haltech ps1000. Running 1zz coils direct fire
    1990 ST185 Running stock Gen 3 power, 216awhp at 15psi. 13.6 second down the quarter

  3. #63
    Forum Member
    Join Date
    Nov 2016
    Location
    Vic
    Posts
    1

    Default Re: 3SGTE coil on plug conversion

    Hi. Anyone know if these 1zzfe cop are suitable for the 5sfe motors?
    Forged rebuild, turbocharged and Running haltech ps1000 ecu.
    Can I use standard 5sfe dizzy for signals and trigger?
    What's required?

  4. #64

    Default Re: 3SGTE coil on plug conversion

    Sorry to pull up an older thread.

    I’ve got a 3sgte gen 2. It’s going into an rt72 corona. I’ll be deleting the dizzy and using it as just a cam angle sensor to run 1zz coils as that’s what seems to be the go by the rest of this thread.

    Question is: am I able to do this using an apexi power fc? I know it can do the COP setup as it does it in the gtr. But can it do it from just the distributor output?

    Wondering if anyone could point me in the direction of how to wire this also as I’m just learning about this fandangled petrol stuff.


    Sent from my iPhone using Tapatalk

  5. #65
    Junior Member Automotive Encyclopaedia
    Join Date
    Nov 2006
    Location
    wa
    Posts
    1,174

    Default Re: 3SGTE coil on plug conversion

    If the powerfc you have is for a 3sgte it won't run COPs. There was a guy from Europe iirc Nodde was his user name on the mr2 forums that made something external/add on to allow you to run COP with the powerfc. Try googling that, with any luck the informations not lost like so much had been.

Similar Threads

  1. MA61 5me to 5mge conversion guide
    By Enchanter in forum Engine & Driveline Conversions
    Replies: 36
    Last Post: 17-09-2013, 06:07 PM
  2. pressure tested and problems
    By 2revup in forum Tech and Conversions
    Replies: 10
    Last Post: 18-02-2008, 03:11 AM
  3. MA70 --> JZA70 Conversion
    By Lambolica in forum Engine & Driveline Conversions
    Replies: 119
    Last Post: 09-09-2007, 07:39 PM
  4. Coil for High Energy Ignition
    By Tham in forum Tech and Conversions
    Replies: 13
    Last Post: 24-05-2006, 12:29 AM
  5. checking timing on car with coil on plug setup
    By chris davey in forum Tech and Conversions
    Replies: 3
    Last Post: 23-02-2006, 06:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •