Results 1 to 2 of 2

Thread: Landcruiser HJZ75 Calipers on....

  1. #1
    Junior Member 1st year Apprentice
    Join Date
    Mar 2008
    Location
    NSW
    Posts
    12

    Default Landcruiser HJZ75 Calipers on....

    a VALIANT!!!!

    Thats right!

    I am fitting them to my 1973 VJ Sedan.
    Standard braking system consisted of a PBR Alloy Caliper with a single piston and a 24mm thick disc.
    Might the black lines....alittle hard on the braking



    the New system will consist of:
    HJZ75 Calipers
    Remachined Disc's with pressed Front Hubs




    After Painted with new Seal Kit


    Painted Satin Black from KBS-Coatings

    Also..IF ANYONE in SYDNEY has a spare set of pin's to suit the HJZ75 Caliper's and the big retainer clip that goes on the top and wire clip pin to lock everything together...it would be much appreciated since the wrecker stiffed me!
    Last edited by VeeJay; 20-03-2008 at 12:04 AM.

  2. #2
    Junior Member 1st year Apprentice
    Join Date
    Mar 2008
    Location
    NSW
    Posts
    12

    Default Re: Landcruiser HJZ75 Calipers on....





    Caliper's Mounted on the Stub Axles

    Rotor grooves need abit more grinding to stop them catching on the discs which have already had the overall diameter reduced by 5mm.

    New Rubber Hose's have been made with a 10mm Banjo Fitting at one end and 3/8 NP Female at the chassis side.

    When Seperating the Hub from the discs, I installed new 7/16 HD Studs and Benix 4WD Pads with a titanium strip to help the bed in process

Similar Threads

  1. Any decent rear calipers with integral hand-brake
    By Sam_Q in forum Tech and Conversions
    Replies: 40
    Last Post: 05-02-2008, 01:17 PM
  2. Ceramic Coating Brake Calipers
    By Dom-AE71 in forum Tech and Conversions
    Replies: 7
    Last Post: 26-02-2006, 09:45 PM
  3. Wheels to clear S14 calipers on AE86.
    By Sprinter-Saurus in forum Tech and Conversions
    Replies: 5
    Last Post: 12-02-2006, 11:11 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •