4AGE 20v Silvertop

[skep]

Hi there guys, im new to this site and need a few questions answered and help given (will reward rep!) (also sorry if its in the wrong section, not really sure which to post in)

i recently purchased a 4age 20v s/t engine box driveshafts hubs and brakes full exhaust system and the ecu, it came with the wiring loom, but the thing is, its been cut at the point of entering the firewall.

can anyone help me out? give some advise to wire up?
i am currently await my purchase of the 3 ecu plugs as it did not come with this either.

would it be worth trying to wire it up? or should i search for a complete wiring loom (if possible to find)


thanks very very much in advance!
you can also contact me through email: [email protected]

Adam

[Bazooka]

This may help you out........

http://www.club4ag.com/faq%20and%20t...V%20Silver.htm

[Grega]

as you're in vic you may want to try meridian motorsport they may be able to help you with looms and wiring if you're not too confident in that aspect.

otherwise the best wiring stuff i've come across is on phil bradshaws website
http://home.clear.net.nz/pages/phil....ins%201999.doc

cheers

[skiddz]

i have spare ecu plugs if you want them also have a look at phil bradshaws page it has a pinout diagram,

somthing to be aware of re that diagram/table is the manual section doesnt have iscv in there so you use the same position as the auto iscv iirc

[skep]

i have spare ecu plugs if you want them also have a look at phil bradshaws page it has a pinout diagram,

somthing to be aware of re that diagram/table is the manual section doesnt have iscv in there so you use the same position as the auto iscv iirc

would they suit a mannual silvertop?

if so how much you want for them? including delivery to melb, 3047