Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 50

Thread: KKR forged wheel nuts

  1. #31
    Junior Member Chief Engine Builder De@No's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    3,359

    Default Re: KKR forged wheel nuts

    I might need one of these..just for the time being..im going to measure up some of my other ones to see if they will fit..

    Then i might buy a set of you grant..
    Z20- SOLD

  2. #32
    Forum Sponsor Automotive Encyclopaedia dori dori's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    835

    Default Re: KKR forged wheel nuts

    Hey Deano, you know where we are.

    Cheers

  3. #33
    Experience shows I'm no Chief Engine Builder Roundy's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    3,572

    Default Re: KKR forged wheel nuts

    I just ordered some of these on wednesday and they are here on friday!

    Very prompt service as always, thanks Grant

    I can-not believe how light these are! You think 21g but doesn't translate until you hold them.

    I bet the 1 locknut on each wheel will weigh more than the other 4 KKR nuts combined
    "If you try to fail, and succeed, which have you done?"
    My ST185 with 278awkw (2.2L is running...)
    1:08.08s @ Wakefield 1:37.29s @ Winton
    27.90s @ Esses Hillclimb

  4. #34
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: KKR forged wheel nuts

    How tall are these dude? The locknuts I'm thinking about getting with these come in two different heights, would prefer something which matches.
    Teh UZA80 - Project Century - Remotely p00'd by association

  5. #35
    Toymods Board Member Chief Engine Builder Hiro's Avatar
    Join Date
    Apr 2006
    Location
    NSW
    Posts
    3,078

    Default Re: KKR forged wheel nuts

    Quote Originally Posted by dori dori
    I guess any lock nut would be sufficent.

    I can't see why they won't work with Work wheels. So long as they are not tappered like the Volk GT-C you should be fine.

    Cheers
    So are they tapered or not? Hard to tell from the photo. Looking at a set for the AE102, sick of having to use the stupid adaptor lock-bolt thingy on the cheap BSA nuts that came with the wheels, feels like it's going to snap every time.
    AE102 - Charlene the Old Faithful, Reborn
    JZZ30 - Lexi the Spacecruiser, 1JZGTE>>3SGE. 200rwkw, hunting Skylines and n00bs in SS Commodores
    ST162 - Charlie the non-ghey Celica, 3SGE>>4AGE. GOOOOOOOONE
    AE82 - Rosie the Bitsa from Hell, 70.8kw atw. Has been converted into garage space and money at last
    KE55 - Billie the Beast, sadly missed

  6. #36
    Experience shows I'm no Chief Engine Builder Roundy's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    3,572

    Default Re: KKR forged wheel nuts

    I measured mine, they are ~35mm overall length.

    Hiro: They are tapered, i think it is a straight 60° taper, like most wheels i think...
    "If you try to fail, and succeed, which have you done?"
    My ST185 with 278awkw (2.2L is running...)
    1:08.08s @ Wakefield 1:37.29s @ Winton
    27.90s @ Esses Hillclimb

  7. #37
    Toymods Board Member Chief Engine Builder Hiro's Avatar
    Join Date
    Apr 2006
    Location
    NSW
    Posts
    3,078

    Default Re: KKR forged wheel nuts

    Hmm, will have to pull one of the nuts off to double check, 60 sounds about right though.

    They're Volk TE37 copies, so thought it'd be best to double-check.
    AE102 - Charlene the Old Faithful, Reborn
    JZZ30 - Lexi the Spacecruiser, 1JZGTE>>3SGE. 200rwkw, hunting Skylines and n00bs in SS Commodores
    ST162 - Charlie the non-ghey Celica, 3SGE>>4AGE. GOOOOOOOONE
    AE82 - Rosie the Bitsa from Hell, 70.8kw atw. Has been converted into garage space and money at last
    KE55 - Billie the Beast, sadly missed

  8. #38
    JZZ20 Backyard Mechanic forey's Avatar
    Join Date
    Mar 2007
    Location
    TAS
    Posts
    274

    Default Re: KKR forged wheel nuts

    ill take 20, suit z20 so 1.5mm?

    postage to 7009 tas?
    87' z20 Soarer - 1jz Gt35r -

  9. #39
    Forum Sponsor Automotive Encyclopaedia dori dori's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    835

    Default Re: KKR forged wheel nuts

    Quote Originally Posted by forey
    ill take 20, suit z20 so 1.5mm?

    postage to 7009 tas?
    Hi forey, yes Toyota is 1.5mm.

    Total cost will be $93.00.

    Postage is free for Toymods members.

    Send me a PM

    Cheers,

  10. #40
    Forum Sponsor Automotive Encyclopaedia dori dori's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    835

    Default Re: KKR forged wheel nuts

    Quote Originally Posted by Roundy
    I measured mine, they are ~35mm overall length.

    Hiro: They are tapered, i think it is a straight 60° taper, like most wheels i think...

    Hi Roundy, thanks for that. I was away last week on Holidays.

    Cheers,

  11. #41
    Junior Member Too Much Toyota GUN METAL's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    5,429

    Default Re: KKR forged wheel nuts

    I am keen as for some of these as well, but as per Merc Blue i want to make sure these are the real deal.

    I also want them for my Workmeistes that will be on and off the car regularly and they will be used on the track.

    If it all checks out send me the details and i will arrange for payment, if i am in the area will pick them up, you have them in stock ?
    Last edited by GUN METAL; 03-02-2009 at 07:30 AM.
    MY BELOVED AW11...Updated members ride thread>>>>http://www.toymods.net//forums/showt...=4584#post4584

    AW11s always welcome in my driveway !

  12. #42
    Forum Sponsor Automotive Encyclopaedia dori dori's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    835

    Default Re: KKR forged wheel nuts

    Hi Gun Metal, our shop is located at Ingleburn.

    Drop by and check out the wheel nut quality for yourself.

    We have them in stock.

    cheers,

  13. #43
    Forum Sponsor Automotive Encyclopaedia dori dori's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    835

    Default Re: KKR forged wheel nuts

    thread revival time.

    Cheers,

  14. #44

  15. #45
    Forum Sponsor Automotive Encyclopaedia dori dori's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    835

    Default Re: KKR forged wheel nuts

    They will go nice with your wheels


    Quote Originally Posted by mullett View Post
    mmm, shiny.

    -RM

Similar Threads

  1. Aluminium Wheel Nuts - Use Care - Lost a wheel at 60km/hr today - stripped bolts PICS
    By Ghetto-Spec .:bayka:. in forum Tech and Conversions
    Replies: 35
    Last Post: 28-02-2007, 01:46 PM
  2. Old RWD Wheel Studs / Nuts Size
    By Screamn_Sleeka in forum Tech and Conversions
    Replies: 3
    Last Post: 21-06-2006, 04:51 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •