Page 1 of 3 123 LastLast
Results 1 to 15 of 35

Thread: oils an't oils what to use in a 3s gte?????

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Jan 2006
    Location
    queensland
    Posts
    14

    Default oils an't oils what to use in a 3s gte?????

    Ok i have a 3s gte in a ra28 celica worked engine running 20 pounds of boost just wanting to get some ideas of oils and thickness that other people use and why?

  2. #2
    Forum Member 1st year Apprentice
    Join Date
    Jan 2006
    Location
    queensland
    Posts
    14

    Default Re: oils an't oils what to use in a 3s gte?????

    Also some times people say oil filters make a differance any thoughts and types/sizes of filters would be good to know to.

  3. #3
    Forum Sponsor Carport Converter TurboRA28's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    1,917

    Default Re: oils an't oils what to use in a 3s gte?????

    Hey mate, in my 3s-gte I am running a Castrol racing oil, 10w-60. I think maybe its called Edge now, but when I last purchased it was just castrol racing.

    http://www.castrol.com/castrol/produ...tentId=7013360

    I picked that mainly because I wanted a synthetic oil but something a bit thicker as the engine will see a lot of track days and subject to a lot of heat so figure a 60 oil would be better hopefully not thin out quite so much.

    I use a geniune toyota oil filter.

    Cheers
    Joel
    1977 RA28 Celica - 1MZ-FE Members Rides
    1996 FZJ80 Landcruiser.
    Email : [email protected]

  4. #4
    Junior Member Domestic Engineer 1200det's Avatar
    Join Date
    Nov 2005
    Location
    ACT
    Posts
    514

    Default Re: oils an't oils what to use in a 3s gte?????

    Most of the time oils and viscosities are a personal preference , We could argue all day long about it

    Personally i only run Repsol Oils in the Lexus V8 and use Redline Synthetics in my 7MGTE Soarers.

    Look at a decent 15w/40 oil

  5. #5
    Junior Member Domestic Engineer 1200det's Avatar
    Join Date
    Nov 2005
    Location
    ACT
    Posts
    514

    Default Re: oils an't oils what to use in a 3s gte?????

    Only use a Genuine Toyota Filter

  6. #6
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: oils an't oils what to use in a 3s gte?????

    With the oil filter, just get a Toyota one for your engine, they are the best.

    I personally was using Mobil 1 5w50 in my 1GGTE, and I figured so long as it wasn't burning it, I would keep using it. I've now got 10w40 Mobil Synth S due to budget reasons
    Teh UZA80 - Project Century - Remotely p00'd by association

  7. #7
    Welcome to the Darkside! Automotive Encyclopaedia -==L=a=N=c=E==-'s Avatar
    Join Date
    Nov 2005
    Location
    Rosewood
    Posts
    1,004

    Default Re: oils an't oils what to use in a 3s gte?????

    I used castrol formula R 0W-40 and 5W-30. Good everday oil i reckon. Depending on the season.

    Oil filters really doesn't matter. I just grab a 4pack of valvoline filters. Does the trick.

    Really at the end of the day, oils are basically all the same.

  8. #8
    Forum Member Grease Monkey
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    54

    Default Re: oils an't oils what to use in a 3s gte?????

    I use shell helix ultra 15w-50 full synthetic. I only use toyota oil filters as i get them for about $12 each.

  9. #9
    Junior Member Domestic Engineer urantia's Avatar
    Join Date
    Oct 2005
    Location
    WA
    Posts
    711

    Default Re: oils an't oils what to use in a 3s gte?????

    if true, this is actually a good reason to use the yota oil filters. they provide less restriction to oil flow.

    i just spent $80 on mobile 1 10w-30 what a waste of money, thin like water, knock knock in the morning until warm, i'm going straight back to soemthing thicker. and less expensive.

  10. #10
    Forum Member 1st year Apprentice
    Join Date
    Jan 2006
    Location
    queensland
    Posts
    14

    Default Re: oils an't oils what to use in a 3s gte?????

    yeah apperently their is this site called bobistheoilguy.com their is info on their just a pain finding it. I just thought i'd post this up due to coming up to an oil change and wanting to know a few more options. As far as the oil in my car at the moment i have no idea been playing with it too much and not enough driving but this weekend i thinks its time to change

  11. #11
    JZ Powered Too Much Toyota EldarO's Avatar
    Join Date
    Oct 2005
    Location
    Western Aus
    Posts
    5,614

    Default Re: oils an't oils what to use in a 3s gte?????

    I use Penrite HPR-15 in the 7MGTE, never a knock or any strange sound.

    Mate who reccomended it to me uses it in all of his turbo cars, which includes a 1JZ supra, running 13psi.

    Eldar.O.

  12. #12
    Junior Member Domestic Engineer urantia's Avatar
    Join Date
    Oct 2005
    Location
    WA
    Posts
    711

    Default Re: oils an't oils what to use in a 3s gte?????

    i'll give that penrite a try, they make excellent lsd oil imho.

  13. #13
    Junior Member Grease Monkey
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    119

    Default Re: oils an't oils what to use in a 3s gte?????

    mate on boost you should not run oil that is too thin. Otherwise its gonna burn too fast.
    If i was you i'd run at least a 50W. Mobile 1 has the 5-50w that would be the minimum used. Otherwise maybe even 10-60w as your engine get very hot being a turbo

  14. #14
    Junior Member Domestic Engineer urantia's Avatar
    Join Date
    Oct 2005
    Location
    WA
    Posts
    711

    Default Re: oils an't oils what to use in a 3s gte?????

    while mobile 1 is considered too thin anyway.

    a thin oil is usually what is recomended for turbo cars, 10w-30 is recommended pretty much across the board on most japanese turbo motors. But of course as the kms get up, the engine is going to get worn and require a thicker oil. In my opinion a 50 weight it abit thick for a turbo to digest. The reason i tried the 10w30 is the engine has pretty low k's on it , and supercheap here in tas did not have a great selection. a 15-40 sounds like the go (which also is what the redline site suggest for this motor)

  15. #15
    Junior Member Backyard Mechanic bathurst-91's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    339

    Default Re: oils an't oils what to use in a 3s gte?????

    Anyone switched from Penrite to Penrite SIN ?

    any comments/thoughts on it.
    ----
    -Andrew
    ------------------
    A race continues forever...

Similar Threads

  1. 5S FE to 3S GE
    By adam golder in forum Tech and Conversions
    Replies: 19
    Last Post: 05-10-2007, 10:47 PM
  2. 3s rwd conversion parts, what else needed?
    By CoronaC in forum Tech and Conversions
    Replies: 5
    Last Post: 11-01-2006, 08:43 AM
  3. 3S BEAMS & 6 speed Altezza gear box into KE30 chassie
    By ToDa30/4 in forum Tech and Conversions
    Replies: 23
    Last Post: 03-01-2006, 11:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •