thrust bearing - are you referring to the release bearing for the clutch, the spigot bearing or an internal bearing in the box? (just making sure)
rear main seal is simple - have loads of them
T
hello im looking for the part numbers or possible suppliers for a thrust bearing for the t50 and a rear main seal for the t50 gearbox.
thanks
AE86 - coming soon to a quiet mountain pass near you...
WRX - currently epa'd...
thrust bearing - are you referring to the release bearing for the clutch, the spigot bearing or an internal bearing in the box? (just making sure)
rear main seal is simple - have loads of them
T
im talking about the bearing that is up against the clutch 'forks' (metal 'arms' in the centre of the clutch, which is held on by 2 clips.
with the rear main, i know you;d have heaps, but to you know where i can get em new in NSW???
thanks
AE86 - coming soon to a quiet mountain pass near you...
WRX - currently epa'd...
any auto parts place should have these... i always just ask my local guy for the gearbox rear main seal and he knows what im after...
as for the thrust bearing i am yet to find a place that will only sell that part, it usually comes with the pressure plate as a set, you can get the clutch plate seperately... i think i have a brand new thrust bearing at home that i dont want, let me know if you want it and ill check to make sure iv got it
cheers
thanks mate, i'll look into it. im getting a new clutch with this motor so i'll see if it comes with the bearing.
AE86 - coming soon to a quiet mountain pass near you...
WRX - currently epa'd...
the clutch release/ thrust bearing is "brg2155" also known as "gsb342". you should be able to get one from a clutch place. it as a fairly common bearing in toyotas
T
thank you.
any idea on the rear seal #?
AE86 - coming soon to a quiet mountain pass near you...
WRX - currently epa'd...
Maybe the part number for the clutch bearing is 90363-38084, but there are 2 types so maybe its wrong.
The rear seal is 90311-32086 (same part as for KE30, KE35 etc) but you don't need to know this. If you go into the Toyota dealership they can look it up you know. (Well i hope they can, some parts interpreters are actualy quite dumb.) If you go to Repco, the Toyota number is not going to help.
numbers i quoted are for aftermarket nachi etc bearing.
rear main seal is a 32-52-11 size.bearing shop would be able to find it
T
Bookmarks