The GT4 gearbox won't bolt onto the back of a 4agze without lots of work. I would have thought a better/easier option would be to use the correct 4agze flywheel and E series gearbox which be a bolt on affair.
hi guys , im currently doing a mr2 gearbox conversion into my mazda wagon as the gearboxes are crap. i have found a problem, the 4agze bellhousing is 2mm too small for my flywheel to fit inside, which is obviously a major problem
do u guys know if a celica GT4 bellhousing is any bigger for the 3sgte? and can i get one of these boxes and just remove the transfer
i already have a e51 box with trd clutchpack lsd i wanted to use , so i will swap the internals over to the new box and run it as a fwd box...
does anyone know if this is the case with the bell housing and does anyone know where i can get a blown gt4 box i can use for the bellhousing? or even a mr2 sw20 E series bellhousing?
i got quoted 895 for a complete good gt4 box which is far too expensive for what im needing
thanks
Ross
The GT4 gearbox won't bolt onto the back of a 4agze without lots of work. I would have thought a better/easier option would be to use the correct 4agze flywheel and E series gearbox which be a bolt on affair.
im not using a 4agze im using a mazda bp motor so im making an adapter plate regardless so it doesnt really matter what shape it is
Ahh ok in that case I can't help you ...maybe do a search for 3sgte flywheel diameters vs 4agze flywheel diameters which should give you some idea...
I think there was an ST185 GT4 box for sale on here for a couple of hundred dollars or maybe it was ozcelica...
Bookmarks