Page 2 of 8 FirstFirst 1234 ... LastLast
Results 16 to 30 of 106

Thread: 1JZ / 2JZ into MA61 / MZ10 Guide.

  1. #16
    Junior Member Backyard Mechanic Azzamk2's Avatar
    Join Date
    Jul 2006
    Location
    western aus
    Posts
    172

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    any1 got da number for the bonnyvile automotive or wateva that place is called and were this place is as live in albany=400km from perth.

  2. #17
    Today Im a Domestic Engineer Enchanter's Avatar
    Join Date
    Sep 2005
    Location
    Tas
    Posts
    640

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    I just did a yellowpages.com.au search and came up with two.

    Bonneville Automotive Pty Ltd
    17 Phillips Rd Kogarah NSW 2217
    ph: (02) 9553 4708 Motor Engineers & Repairers


    Edit: called both, deleted the wrong one.

    Cost quoted today $300 + postage.
    Last edited by Enchanter; 18-07-2006 at 08:43 AM.

  3. #18
    Junior Member Backyard Mechanic Azzamk2's Avatar
    Join Date
    Jul 2006
    Location
    western aus
    Posts
    172

    Thumbs up Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    thanks a heap enchanter

  4. #19
    Founding ****** Automotive Encyclopaedia Mos's Avatar
    Join Date
    Jul 2005
    Location
    NSW
    Posts
    1,157

    Default Re: 1J/2J MA61 Guide.

    Quote Originally Posted by CrUZida
    Quote Originally Posted by wilbo666
    I have heard that if you get the moulting section top off a 7m AC compressor the stock MA61 lines can then be used. I haven't confirmed this...
    AFAIK this is for putting new motors in 7M equiped vehicles.

    ie, MX83 to JZX81 or UZX83.
    No, sorry. MX83 to JZX81 does not always work. The A/C top and lines on the 7M are taller and foul the 2JZ power steering pump when on top of a 2JZ A/C compressor. The Aristo 2JZ compressor is large diameter so there may be smaller diameter compressors on the 1JZs where this will work but can't confirm. (The 2JZ "looked" like it would work).

    On at least some 1UZs the 7M A/C lines will bolt up directly to the 1UZ compressor top.

    Mos.
    Admin, I.T., Founding Member, Toymods Car Club Inc.
    2000 IS200 Sports Luxury 1UZ-FE VVTi, 1991 MX83 Grande 2JZ-GTE (sold)

  5. #20
    Junior Member Backyard Mechanic Azzamk2's Avatar
    Join Date
    Jul 2006
    Location
    western aus
    Posts
    172

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    my front cut waz originally manual but the box didnt come with my frontclip but i got a auto with computer from a soarer with a 1jz.. will it still work ok even tho the 1jz in my clip waz manual and prob ran from my ecu? im a noOb!!

  6. #21
    JZA61
    Guest

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    ok so we are talking bout the digi dash? im going 1jz-gte, how does the tacho converter go on? does it just plug into the back of the stock instrument cluster then the 1j wires go into that?

  7. #22
    Rest in Peace Conversion King ViPeR_NiPPleX's Avatar
    Join Date
    Oct 2005
    Location
    VIC
    Posts
    2,183

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    There are two plugs that go into the back of the original ecu, one is for the engine loom, the other is for the body loom. The body loom plug stays with the car after an engine swap and has a few good pins on it for the use of hooking up a tacho.



    Have a look at my recently made thread about howto build a convertor for more info if you haven't already

  8. #23
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    Quote Originally Posted by JZA61
    ok so we are talking bout the digi dash? im going 1jz-gte, how does the tacho converter go on? does it just plug into the back of the stock instrument cluster then the 1j wires go into that?
    1JZ:
    Output of ignitor goes to tacho convertor. (trace back from IG in the diagnostic plastic box on the engine)...

    Tacho Convertor:
    Power to tacho convertor
    Ground to tacho convertor
    Input from 1JZ ECU (IG)
    Output to MA61 Dash

    MA61 Dash:
    Output of tacho convertor -> Dash tacho input

    Easy

    You have to wire it in yourself...it doesn't just plug in

    Cheers
    Wilbo

  9. #24
    JZA61
    Guest

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    Quote Originally Posted by wilbo666
    1JZ:
    Output of ignitor goes to tacho convertor. (trace back from IG in the diagnostic plastic box on the engine)...

    Tacho Convertor:
    Power to tacho convertor
    Ground to tacho convertor
    Input from 1JZ ECU (IG)
    Output to MA61 Dash

    MA61 Dash:
    Output of tacho convertor -> Dash tacho input

    Easy

    You have to wire it in yourself...it doesn't just plug in

    Cheers
    Wilbo
    cheers wilbo

  10. #25
    Forum Member
    Join Date
    Oct 2006
    Location
    wa
    Posts
    2

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    hey guys, im a little lost, haha. i have a gz10 with a 1ggeu (auto), and ive got a 1j and box (auto),and whole wiring loom, does everything on that list apply to me? just some things dont sounds right?? any help would be great

  11. #26
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    All mechanical stuff will be 99% identical.
    Electrical stuff will be 90% identical with a few small differences.
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS

  12. #27
    7M-BHGE Automotive Encyclopaedia
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    810

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    Can i ask, is the gearbox kept in the same position because its easy or it does not need moving back?
    Quote Originally Posted by skiddz
    deodorised fish oil = winnnaaaaaa, goodness of teh fishz but with out the smellz

  13. #28
    Toyota Farmer Grease Monkey Yotaholic's Avatar
    Join Date
    Feb 2007
    Location
    NFLD.
    Posts
    106

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    Hey guys I was trying to get in touch with Bonneville to get more info on the 1j mounts for my ma61 . Can anyone tell me if this info is still correct ? 2 days calling with either a busy signal or an operator saying "sorry your call cannot blah blah blah !!


    Bonneville Automotive Pty Ltd
    17 Phillips Rd Kogarah NSW 2217
    ph: (02) 9553 4708 Motor Engineers & Repairers



    it's an expensive bit of steel but with most other options being solid mount I would like to know just how these worked from someone who has them and if they used the extra mounting holes in the block for a little more room up front ? Just some noob questions and search came up with a little info but no first hand experiance from an owner on install and fitment issues. Thanks for any help the JDM gods can provide . I can make them but I would rather buy the mounts and be done with it . The measuring and fitting and remeasuring just gives me a headache so I would like to make sure it's done right the first time.
    Cheers
    Bruce
    82 Ma61 1JZ/R154 HKS Twins
    94 JZA80 V160 S475R (sold)
    94 JZA80 V160 T51R KAI CDN. Spec

  14. #29
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    Thats the last number I had for them, but you'll need to dial +612 9553 4708
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS

  15. #30
    Toyota Farmer Grease Monkey Yotaholic's Avatar
    Join Date
    Feb 2007
    Location
    NFLD.
    Posts
    106

    Default Re: 1JZ / 2JZ into MA61 / MZ10 Guide.

    Quote Originally Posted by CrUZida
    Thats the last number I had for them, but you'll need to dial +612 9553 4708

    Thanks thats what I was dialing but I needed to add 0116 ...I'm so far away they had to add a couple more numbers .. I just spoke with Ryan and he gave me all the info I needed. Mounts are on the way . He also said he's sold around 60 sets now 1j madness can this be true ?
    Cheers
    Bruce
    82 Ma61 1JZ/R154 HKS Twins
    94 JZA80 V160 S475R (sold)
    94 JZA80 V160 T51R KAI CDN. Spec

Similar Threads

  1. MA61 - RA65 Struts & Powersteering Arms conversion
    By Negative Boost in forum Tech and Conversions
    Replies: 102
    Last Post: 04-06-2013, 09:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •