Results 1 to 7 of 7

Thread: ra65 rack and pinion power steering rack

  1. #1
    Junior Member Grease Monkey Intense's Avatar
    Join Date
    Dec 2005
    Location
    Victoria
    Posts
    186

    Default ra65 rack and pinion power steering rack

    I need to replace my steering rack, what I need to know is, does it have to be from an ra65, or can I get one from a powersteering ra60/sa63. Or are there any other cars that have the same steering rack? Also what price would I be looking at for a second hand one?
    Sa22c Series 1 rx7, 12a extend port, 900rwkw @ 93,320 rpm sold
    Ra65 celica hatch, 22re with 2.25" exhaust, 500Nm @ 27rpm sold
    Ae86, 4agze, 170Takumi Powers @ 11,000 rpm

  2. #2
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: ra65 rack and pinion power steering rack

    EPC says

    ST141, RT142, SA63, RA6# are the same.

    I'd still check this first hand but that is what the EPC says

    Cheers
    Wilbo

  3. #3
    Junior Member 1st year Apprentice
    Join Date
    Mar 2006
    Location
    QLD
    Posts
    19

    Default Re: ra65 rack and pinion power steering rack

    as if a6's need p/s!...wouldn't mind one in my car sometimes...would make the bigger tracks a bit easier to drift
    Toyota Celica JZA65 Drift Car
    KAIZEN GARAGE - QLD agent for Adaptronic ECU
    spaRk secRet - HID headlamps

  4. #4
    Gobble, Gobble! Automotive Encyclopaedia mrshin's Avatar
    Join Date
    Nov 2005
    Location
    Montrose
    Posts
    1,154

    Default Re: ra65 rack and pinion power steering rack

    Quote Originally Posted by timottaway
    as if a6's need p/s!...wouldn't mind one in my car sometimes...would make the bigger tracks a bit easier to drift
    If you don't appreciate power steering, then you're not running enough castor.


    I've had issues with swapping an RA60 rack before, I remember there being differences and having to try a couple before I found one that fitted. Sorry, I can't remember exactly what the issues were though.

  5. #5
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: ra65 rack and pinion power steering rack

    MA61 isn't the same as SA63 etc that I can say!

    But yeah i'd still check to make sure!

    Cheers
    Wilbo

  6. #6
    7M-BHGE Automotive Encyclopaedia
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    810

    Default Re: ra65 rack and pinion power steering rack

    Quote Originally Posted by mrshin
    If you don't appreciate power steering, then you're not running enough castor.
    I like that, sounds good.
    Quote Originally Posted by skiddz
    deodorised fish oil = winnnaaaaaa, goodness of teh fishz but with out the smellz

  7. #7
    Junior Member 1st year Apprentice
    Join Date
    Mar 2006
    Location
    QLD
    Posts
    19

    Default Re: ra65 rack and pinion power steering rack

    yeah i've run 4.75 degrees and that was with a locker....far too heavy

    nothing more than 4 is required for a celica this together with p/s far too light....

    its a good setting to stop excessive dyanmic camber once a bit of lock is dialled in..

    from experience in a track environment, p/s failures etc fair outweigh there advantages. non p/s rack with p/s arms give a quicker rack and more direct steering feeling and a better feeling of castor and steering angle.

    i'm extremely bias i'm quite the non p/s diehard!
    Toyota Celica JZA65 Drift Car
    KAIZEN GARAGE - QLD agent for Adaptronic ECU
    spaRk secRet - HID headlamps

Similar Threads

  1. TA22 + rack and pinion
    By "Z" UTE in forum Tech and Conversions
    Replies: 603
    Last Post: 19-05-2017, 12:02 PM
  2. Can you adjust steering stops with rack & pinion?
    By 1JZ-Rolla in forum Tech and Conversions
    Replies: 11
    Last Post: 22-07-2012, 02:30 AM
  3. rack and pinion
    By bigmat in forum Tech and Conversions
    Replies: 15
    Last Post: 18-04-2007, 09:33 PM
  4. Which power steering box is going to fit a 22.
    By "Z" UTE in forum Tech and Conversions
    Replies: 7
    Last Post: 19-06-2006, 09:16 PM
  5. rack and pinion steering - new pinion? from where?
    By ed in forum Tech and Conversions
    Replies: 13
    Last Post: 20-05-2006, 07:14 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •