Results 1 to 13 of 13

Thread: What does this plug do?!

  1. #1
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default What does this plug do?!

    I HAVE 1HOUR TO WORK THIS OUT! Okay, so ive just taken my rolla from an auto to a manual...
    Ive been left with 1 to many kick down cables...
    So ive removed the kick down cause in theory, or atleast my theory i wont need it

    After that ive been left with a plug that wont fit anywhere... Im geussing when the car was auto, this would tell it wether to start or not, so that you couldnt start in drive or reverse? Also maybe reverse lights? The new slot for the plug to go is much simpler, maybe reverse only?



    But ive also snapped some little plugs off a thing coming out of the thermo housing. Wondering do i need to glue them back on and put it back together or can i seal it off and not worry??


    Im also left with some plugs that seem to come from the starter, (cant see without getting underneath), they have simply come dissconnected from the relay that came from. But the relay has 3 empty pins, and i have two plugs. Anyone know which pins these go to? Im gonna get my test light out and have a look but any help on making this easier is much appreciated...


    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  2. #2
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: What does this plug do?!

    PRETTY PLEASE SOMEONE?! I GOT 5 MINS?!!!

    Just need the plug question answered now...
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  3. #3
    Altia ER34 GTT Domestic Engineer JetspeedCamry's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    497

    Default Re: What does this plug do?!

    I don't exactly know, but the large spades look like for the inhibitor switch, and the 2 smaller pins look like for the reverse lights...
    But on mine it was different, mine had a large connector on the front of the gearbox for the Neutral Start Switch...and the reverse connector was built into that.
    Sorry can't be anymore help.
    Kind Regards,
    Kurt.

    1998 ER34 ニッサン スカイラインGT- T
    RB25DET 5 Speed Manual | Blitz SE Return Flow FMIC | Greddy Profec II Spec B BC | Apexi N1 Turbo Back Exhaust

  4. #4
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: What does this plug do?!

    Do i need the lil blue plug that taps into the thermo housing? Cause i cant seem to glue it bag together properly? Is it just for the choke? Nesecarry at all???

    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  5. #5
    Building Corollas Chief Engine Builder Cuzzo's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    4,628

    Default Re: What does this plug do?!

    The relay wires check if one is earth/ground and see if the other one is power either constant or when ign on. You will need to read up on relays on the net even on toymods there is a thread on a starter relay have a look at that should be pretty easy to understand, if not reply back.
    KE30 4agte - Bullet - Rick Rolled
    UZX83 1UZ W58- Cruiser - Tow Car - Fun Car
    Quote Originally Posted by -GT- View Post
    You had an oil and plastics engine bay fire, with flames that reached at least to the roof - of course shit got hot, it wasn't burning jiffy firelighters back there.

  6. #6
    Junior Member Backyard Mechanic STR8 2.8's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    235

    Default Re: What does this plug do?!

    Quote Originally Posted by Smokey228
    Do i need the lil blue plug that taps into the thermo housing? Cause i cant seem to glue it bag together properly? Is it just for the choke? Nesecarry at all???

    Cheers,
    Jase
    its just for emissions stuff, dont worry about it
    just leave it as is, no need to plug it up, just plug the hoses that connected to it.
    just about every one ive ever seen is broken off.
    I have a Crown

  7. #7
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: What does this plug do?!

    Awesome news!

    Okay, with the big plug, the two smaller ones are reverse. The two larger ones im geussing are inhibitor switches? Do i just bridge them? Cause its not seeming to work. Car wont crank over...

    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  8. #8
    Altia ER34 GTT Domestic Engineer JetspeedCamry's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    497

    Default Re: What does this plug do?!

    Yeah as mentioned that blue thing is a BVSV (bimetal vacuum switching valve)..simply clicks on and connects the hoses together at a certain temp. I got a mint one from a wrecker, but when mine was broken, didnt seem to make any difference at all. Just plugged the lines.

    And yes just bridge the two termals with spade plugs and a bit of wire.
    Kind Regards,
    Kurt.

    1998 ER34 ニッサン スカイラインGT- T
    RB25DET 5 Speed Manual | Blitz SE Return Flow FMIC | Greddy Profec II Spec B BC | Apexi N1 Turbo Back Exhaust

  9. #9
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: What does this plug do?!

    I tried bridging the plug. Still doesnt seem to start. I cant understand what the problem is. Doesnt attempt to crank what so ever...??? Any ideas???

    Gonna try jump start it today, perhaps isolate the problem to the starter motor. Could be that those two wires are in the wrong spots or something...

    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  10. #10
    Building Corollas Chief Engine Builder Cuzzo's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    4,628

    Default Re: What does this plug do?!

    check if you starter relay is clicking when you turn the key. Its possible that it wont be with those two spade terminals off.
    KE30 4agte - Bullet - Rick Rolled
    UZX83 1UZ W58- Cruiser - Tow Car - Fun Car
    Quote Originally Posted by -GT- View Post
    You had an oil and plastics engine bay fire, with flames that reached at least to the roof - of course shit got hot, it wasn't burning jiffy firelighters back there.

  11. #11
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: What does this plug do?!

    I remember it was clicking yesterday. In one combination of things. Just cant remember which combination If i cut the two wires leading to that switch, and just solder them together is this bad? Or should i plug them together with a fuse inbetween or something???

    Also, i cant find my test light and i havent got a multi-metre that works. So if i take a more detailed photo of the starter relay will someone be able to ID which plugs go where??? I cant seem to work out which ones + and -...

    Cheers,
    Jase

    EDIT: +rep has rained from the... me... Cheers again
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  12. #12
    Junior Member Too Much Toyota oldcorollas's Avatar
    Join Date
    Aug 2005
    Location
    sydney
    Posts
    12,494

    Default Re: What does this plug do?!

    you need a multimeter.

    on your relay, there is a diagram ont he side, and numbers. there will also be numbers on the pins on the bottom

    one wire is ground and comes off the switching coil
    another wire is power and comes from ignition.

    the other two wires..... one might go to power and one might go to the starter solenoid. it is possible they have just cut into the original wire to do that...

    87and 87A? are basically the same connection.. so you only have two spades to worry about on the relay.. look at it's diagram ont he side.

    once the relay is hooke dup correctly, then you should be able to bridge the auto inhibitor spades (the big ones) and it should work... (also good place to take kill switch from)

    the inhibitor spades and the relay are all in the starter solenoid circuit.. so it all has to be done before it works.
    "I'm a Teaspoon, not a mechanic"
    "There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)

    AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!

  13. #13
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: What does this plug do?!

    YAY! I got it going and it drives too lol

    Annoying thing after all this was that i used the starter motor off the other car, cause i figured it was in better condition

    Well, it wasnt. It was p00 and didnt work, so i swapped em over, tested em. And put the old one back in. Got up and went first go Soooo annoying...

    Everyone has been mad help but, i used a 15amp fuse to link the inhibitor switch. And put two spades onto the reverse light switch. So all is good in down town terrey hills!

    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

Similar Threads

  1. MA61 5me to 5mge conversion guide
    By Enchanter in forum Engine & Driveline Conversions
    Replies: 36
    Last Post: 17-09-2013, 06:07 PM
  2. Sam's MA61 7MGTE Conversion
    By Negative Boost in forum Engine & Driveline Conversions
    Replies: 275
    Last Post: 09-11-2006, 11:08 PM
  3. checking timing on car with coil on plug setup
    By chris davey in forum Tech and Conversions
    Replies: 3
    Last Post: 23-02-2006, 06:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •