Update
This afternoon I took my MA70 brakes to my good friends at Western Brake & Steering and handed over the rotors to be machined and have the centre hole enlarge to 67mm.
Before doing that though I sandblasted them of all their rust, as well as the calipers and backing plates, which had a few rust spots here and there.
I disassembled the calipers and popped the pistons out and the brake pad clips. I washed them liberally in brake cleaner before going to do the sandblasting as the oil, brake fluid and grime clogs the sand.
Caliper
It took me about 90 mins to do both sets of rotors, plates and calipers.
Backing Plates
The backing plates were also time consuming and I didn't try to remove all the factory paint. They came up well enough for painting later.
cheers,
Peter
Bookmarks