Page 11 of 19 FirstFirst ... 910111213 ... LastLast
Results 151 to 165 of 284

Thread: How to: Supra MA70 rear discs to Hilux

  1. #151
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: How to: Supra MA70 rear discs to Hilux

    YAY!!! Ill be ready to put them on this weekend, but next week sometime works for me!

    Can i get em express post and some bank details ill put money across!

    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  2. #152
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: How to: Supra MA70 rear discs to Hilux

    Yay, i also just picked up all the rest of my stuff so will be fitting the rest of the diff this weekend.
    Will be waiting on braided brake lines and brakets before she rolls!

    Best part, cost 250$ less than i was thinking

    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  3. #153
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: How to: Supra MA70 rear discs to Hilux

    Quote Originally Posted by infotechplus
    In this pic, you see the metal was removed directly opposite to the handbrake knob, where the HB passes through.
    The machinist has removed metal from the wrong side on one of my backing plates, now removing the metal from the otherside and fixing his mistake is the only way to make this backing plate still useful.

    Can anyone see any engineering issues with this? Not having all that meat bolted down, rather a smaller amount with a good solid weld?

    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  4. #154
    Junior Member Automotive Encyclopaedia infotechplus's Avatar
    Join Date
    Apr 2006
    Location
    NSW
    Posts
    816

    Thumbs up Re: How to: Supra MA70 rear discs to Hilux

    You should be okay.

    Cheers,

    Peter
    OMG - Winner of the Official "Forum Comment of the Week"!

  5. #155
    is a semi-motivated Domestic Engineer 1JZ~lux's Avatar
    Join Date
    Oct 2006
    Location
    QLD
    Posts
    593

    Default Re: How to: Supra MA70 rear discs to Hilux

    I'd say you'd be fine but check with a local engineer first. If it comes down to it, the machinist stuffed up and you have the right to ask for the backing plate to be replaced.
    Petrol is for washing parts, alcohol's for drinking but NITRO IS FOR RACING!
    My pictures, Returning some time in the distant future.
    RN85 Hilux + 1JZ-GTE = 298.0HP @ 14PSI -- 60' 1.956 ET 13.775 MPH 99.49
    Project Korruption - Stage 1: The Resto. KE35 Corolla Hardtop daily driver

  6. #156
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: How to: Supra MA70 rear discs to Hilux

    Nah ill take this on the chin if it cant be done safely cause he's more a metal fabricator and only does car stuff when asked. Its not what he actauly deals with first hand!
    See most ppl come in with blue prints and designs and measurements and photos and digital designs of what its supposed to look like, where as i went in with the parts, picked up a scrap peice of metal and drew what he was supposed to do in the dust

    Ill talk to a engineer and see what they say, get him to cut and than weld around the whole diameter of the centre nut, that'd be sweet surely!

    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  7. #157
    Junior Member Automotive Encyclopaedia infotechplus's Avatar
    Join Date
    Apr 2006
    Location
    NSW
    Posts
    816

    Default Re: How to: Supra MA70 rear discs to Hilux

    OK everybody who is interested in the MA70 caliper brackets:

    I have five sets of brackets in my possession.

    The following have expressed interest in a set ...

    • bigmat
    • smokey228
    • sleeper (in San Diego )
    • deelux


    That's 4 out of the 5 sets. If there is anyone else that I may have missed please contact me immediately as I don't want to have a situation where I send out a set and there is someone who has been expressing interest for some time (at least since the last batch went out).

    I'd like to hear from the above and anyone else via PM with address and payment details. Obviously if these four are GO then I only have one set left so first in best dressed etc.

    Cheers,

    Peter
    OMG - Winner of the Official "Forum Comment of the Week"!

  8. #158
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: How to: Supra MA70 rear discs to Hilux

    One more thing before i stop harrasing you guys for your brain juice!

    The bearings!? Im so so lost. This is what i assume im supposed to do.
    Sit the circlip into the diff housing, then in goes the retainer, than the cup which is already matted upto the backing plate and has the bearing squished inside goes on and bolts up..? Than the axles slide through grab hold of the other stuff?

    Or is it supposed to be some other way im yet to thinking about, that ill probably try when this fails me

    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  9. #159
    Junior Member Automotive Encyclopaedia infotechplus's Avatar
    Join Date
    Apr 2006
    Location
    NSW
    Posts
    816

    Default Re: How to: Supra MA70 rear discs to Hilux

    Quote Originally Posted by Smokey228
    One more thing before i stop harrasing you guys for your brain juice!

    The bearings!? Im so so lost. This is what i assume im supposed to do.
    Sit the circlip into the diff housing, then in goes the retainer, than the cup which is already matted upto the backing plate and has the bearing squished inside goes on and bolts up..? Than the axles slide through grab hold of the other stuff?

    Or is it supposed to be some other way im yet to thinking about, that ill probably try when this fails me

    Cheers,
    Jase
    No, that sounds right to me. I've just looked through this thread (gee, it seems like a long time go now) and I vaguely remember that being the correct order. I know you slide the axle out after removing the hub and everything else remains bolted up.

    Cheers,

    Peter
    OMG - Winner of the Official "Forum Comment of the Week"!

  10. #160
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: How to: Supra MA70 rear discs to Hilux

    Last night i tried to leave the snap ring in the housing and it would have just slid straight down into the diff.
    So do i put it on the axle and try to force it through the bearing and retainer? Will it compact down under pressure and pass through?

    I did try this, but didnt want to put to much forces against it, a couple decent taps with a hammer but nothing more...

    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  11. #161
    Junior Member Automotive Encyclopaedia infotechplus's Avatar
    Join Date
    Apr 2006
    Location
    NSW
    Posts
    816

    Default Re: How to: Supra MA70 rear discs to Hilux

    Quote Originally Posted by Smokey228
    Last night i tried to leave the snap ring in the housing and it would have just slid straight down into the diff.
    So do i put it on the axle and try to force it through the bearing and retainer? Will it compact down under pressure and pass through?

    I did try this, but didnt want to put to much forces against it, a couple decent taps with a hammer but nothing more...

    Cheers,
    Jase
    Sh*t. The Alzheimer's is kicking in here. I know the snap ring has to go on the axle but in what order, I don't remember. I'd have to pull all my rear end out to jog my memory and as much as I'd love to help you I can't do that with any urgency. I know we slid the snap ring over the end of the axle and then just pushed it into its little groove.

    I don't remember having this trouble. Everything came apart and went back together logically. When I took the bits to my friends at Western Brake & Steering they fitted the new bearing kit, the snap ring and seals. I took it home and slid everything back in.

    Gee, I wish I could help you further. And I know saying it isn't hard is not helping you any.

    Rule of thumb here (that I always work by) - take it apart carefully, note where everything goes, keep everything together, easy refit. Sorry I'm not meaning to sound like a smarta#se. Surely there's someone else done this. Guys?

    Cheers,

    Peter
    OMG - Winner of the Official "Forum Comment of the Week"!

  12. #162
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: How to: Supra MA70 rear discs to Hilux

    Yeh the downside is i pulled the whole drum and axle out in one cause i was in a rush and the machinist took em apart for me...

    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  13. #163
    is a semi-motivated Domestic Engineer 1JZ~lux's Avatar
    Join Date
    Oct 2006
    Location
    QLD
    Posts
    593

    Default Re: How to: Supra MA70 rear discs to Hilux

    Unfortunately it's been 2 yrs since I replaced my oil seals and I checked my manual and it doesn't mention a snap ring. Perhaps if you can post some picks of the parts it might help to jog my memory.


    Cheers
    Dave
    Petrol is for washing parts, alcohol's for drinking but NITRO IS FOR RACING!
    My pictures, Returning some time in the distant future.
    RN85 Hilux + 1JZ-GTE = 298.0HP @ 14PSI -- 60' 1.956 ET 13.775 MPH 99.49
    Project Korruption - Stage 1: The Resto. KE35 Corolla Hardtop daily driver

  14. #164
    I wouldn't trust a... Conversion King Smokey228's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,086

    Default Re: How to: Supra MA70 rear discs to Hilux

    please see the Hilux Axle bearings thread i started. Somewhere in tech and conversion section... Page 1

    Cheers,
    Jase
    JZA023
    11.51 @ 126MPH | 430RWHP @ 21PSI

    Quote Originally Posted by YLD-16L
    Cuzzo is such a premature ejaculator he fertilised the very egg that he grew from

  15. #165
    Hopefully soon a 5S-GTE Chief Engine Builder MWP's Avatar
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,565

    Default Re: How to: Supra MA70 rear discs to Hilux

    [edit]
    Photos removed all resolved.
    Last edited by MWP; 07-10-2007 at 06:04 PM.

Similar Threads

  1. AE82, AE92 and AE101 Brake Upgrade Guide
    By The Witzl in forum FAQ
    Replies: 9
    Last Post: 09-05-2020, 07:08 PM
  2. EF/EL XR Falcon Front & rear disc brakes on a Hilux 2WD ??
    By ICELUX in forum Tech and Conversions
    Replies: 9
    Last Post: 26-08-2011, 11:08 AM
  3. hilux to supra diff centre interchangability???
    By millsi in forum Tech and Conversions
    Replies: 3
    Last Post: 17-11-2006, 07:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •