Results 1 to 1 of 1

Thread: aust AE86 standard springs info within

  1. #1
    i wrote the Automotive Encyclopaedia roadsailing's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    1,182

    Default aust AE86 standard springs info within

    DISCLAIMER: any of these measurements could be wrong.

    i got bored, so i measured a front spring too.

    both pictures show the springs upside down, as they sit nicely on their ground edges. In the car the ground egde goes at the top.

    FRONT:

    tapered spring, not constant taper.

    rate = 100lb/in (1.78579673 kg/mm) according to my spring makers measurements

    free length ~370mm

    wire diameter = 11mm (this is including paint, so possibly a bit less)

    number of active coils = 4 (my guess)

    inside diameter near bottom ~114mm

    inside diameter at top = 93mm




    REAR:

    no taper

    rate = 110lb/in (1.96437641 kg/mm) (according to my spring makers measurements)

    free height ~340mm

    wire diameter = 11mm

    number of active coils = 4 (my guess)

    outside coil diameter ~ 131mm (which could change when compressed)
    inside coil diameter ~ 112mm (which could change when compressed)




    enjoy!
    Last edited by roadsailing; 17-01-2006 at 11:07 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •