4AGE 20V -> Aftermarket coil

[spectral]

Hi all,

I'm considering sticking an aftermarket coil such as a MSD Blaster onto my 20V.

Main problem is the plugs on the coil/dizzy lead... the 20V dizzy has a pin/clip type connector, as does the 20V coil. However 90% of aftermarket coils are the typical post setup.

Does anyone make a coil lead with the Toyota clip-on on one end, and the "aftermarket" type on the other end?

Cheers
Spectral.

[JP]

You can get a coil lead made up pretty cheaply with the right connectors on each end. There's a place in Slacks Creek that does them on the spot, I'll see if I can find the company name.

[sideshow]

whats wrong with factory coil

never had any probs with them

even when turboing the 20v they still work well

[spectral]

Thanks JP, that would be appreciated.


Sideshow: The coil has some large question marks over its health. I can get the MSD Coil for about $70, and a new Toyota one is about double that (or $50 second hand).

If a cheap lead/convertor was available, then the MSD coil makes sense, IMO.. may as well upgrade.