Toymods Dyno Day 14 - Sunday, January 21st

[ViPeR_NiPPleX]

hehe, tis getting a bit late.

My ma61 made 100rwkw at the chaser's dyno... and before that it made 90rwkw at another. So might just be a lucky dip. Need to sort out a CAI before I leave.

[Nark]

Got a friend's farewell in Canberra on the 20th, so no go for me. AGAIN!!

At this rate, I'll sell the Liberty before I get to dyno it.

[flynsx]

woohoo new clutch just went in today fixed up all the minor probs had with the car if it makes it back from the gold coast next week in one piece i ready to go for the dyno day

just jam some race fuel in it and a set of 15" tyres

[trd3sg]

You know I should really do some research before I start talking sh*t There have been some quite high numbers in the 1800-2800 cat. but not by financial members, so the record is only 102.3KW and if I remember reading somewhere your MA61 is 100RWKW or something....

Hmm, should stop posting methinks before I say anything else stupid...

hmmm should be interesting then since my last dyno run -

N/A gen 3 3sge with a microtech, - since my last power run (146.3hp at front wheels = 109fwkw) i have fixed my intake, my semi-rooted flex pipe and my tps.

i would be ecstatic if i cracked 155-160 fwhp on the day - not bad for a totally stock internalled 2 litre - might run some more timing as well.

hmmmm

[JustenGT8]

Are they strapping the bigger hp cars down? I know it can take a frustrating amount of time so not usually done to the fullest extent. It's just that i'll need it strapped pretty tight to run.....it does like to wheelspin

[Draven]

they crack out the heavy straps for the big HP cars... the single turbo 2JZs have been making over 400rwkw, and I know Jodie is expecting bigger things this time around!

[river]

Hi,

Yes... the strong straps for the big HP cars. Apparently they don't have strong enough straps to hold the mighty oil-burning 4AC/AE71 in place... so I guess I'll just spectate.

seeyuzz
river

[JustenGT8]

Over 400rwkw would be nice, see what that thick Syd air can do i guess.

Is it 1st come 1st serve in terms of run position?

[Draven]

yeps 10 chars

[JustenGT8]

Better roll my butt outta bed early then i guess

[BlackSupra]

Better roll my butt outta bed early then i guess

Someone wants an early morning run.

(sorry bout the edit, clicked the wrong button)

[TheToyman75]

Are they strapping the bigger hp cars down? I know it can take a frustrating amount of time so not usually done to the fullest extent. It's just that i'll need it strapped pretty tight to run.....it does like to wheelspin

Justen,

All cars that enter are strapped down. Anything that is expected to make really big numbers can get limiting chains as well. Being the big Daddy 1800hp twin retarder Dyno we have the ladder bar rig out rear and so far I am yet to see a car we can't hold down

[JustenGT8]

Sounds good Rod, have been to a coupla dynos recently that had errr a little trouble

[IN 05 NT]

Sounds good Rod, have been to a coupla dynos recently that had errr a little trouble

cant wait to see that on the dyno dude!...+ rep for gettin me xcited!

[JustenGT8]

Sounds like i'll get done by some 2JZ goodness hp wise but it's the UZ torque that causes the dynos a bit of grief