if there is a carby 4ac in there now then yes, you will need efi fuel lines.
hey, if i put a 4ag in my sprinter do i have to make up bigger fuel lines to take the pressure from the fuel injection?
(i hope not)
if there is a carby 4ac in there now then yes, you will need efi fuel lines.
Got good condition 23/28 bonnet hinges? pm me
You don't need to replace the solid fuel lines, but the rubber lines obviously need replacing with high pressure EFI fuel hose. And make sure you use some decent hose clamps on these.
stock lines will be fine in your situation.
i ran mine like that with no probs
edit: damit bigworm your 2 fast!
So.....i don't have to replace the steel fuel lines that go from the tank to the engine bay, but i should change the rubber hose in the engine bay to high pressure hose to be safe.
yeah?
correct. the old fuel hoses will blow out under the pressure.
sweet. So i don't have to replace the lines from the tank to the engine bay
yesOriginally Posted by Wedged'86
but IMO anything bigger than the VL fuel pump would be advisable to have bigger fuel lines.. then again the VL fuel pump is capable of ..... XXX kw more than you need anyway
good luck with it
Research has shown child in front seat causes accidents, accident in back seat causes child
thanks alot guys, this has cleared up alot.
stock lines are good for over 200RWKW, most 4a's are under that anyway
Bookmarks