Results 1 to 3 of 3

Thread: MX12 Corona NPS? Can't find it!

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Apr 2006
    Location
    California
    Posts
    18

    Default MX12 Corona NPS? Can't find it!

    Ok guys with Coronas, need your help again! Trying to get her started after the 7M-GE swap and I can't get the starter to click. As far as I know its good, the car the engine came from ran.
    What I have done is run power from the battery to the starter just like normal, and used the Corona starter solenoid wire. Really basic, didn't change anything from the way it was set from the factory. So it must be the neutral position switch right?
    Thanks for any advice!

  2. #2
    Yep they look great Carport Converter gianttomato's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    1,811

    Default Re: MX12 Corona NPS? Can't find it!

    MX13 it is located under the gearshift console. Could be different with MX12.

    In the meantime, just jury rig it by directly hooking up the solenoid directly to the battery.
    Last edited by gianttomato; 03-10-2006 at 11:04 AM.

  3. #3
    Forum Member 1st year Apprentice
    Join Date
    Apr 2006
    Location
    California
    Posts
    18

    Default Re: MX12 Corona NPS? Can't find it!

    Thanks. I was looking through a book of parts and I found a drawing of the switch in there. Funny thing is, I don't have a switch! I don't know how the car was starting before, but the circuit must have been bypassed.

    I will try a few things this weekend. Thanks again for the advice and help!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •