Page 2 of 8 FirstFirst 1234 ... LastLast
Results 16 to 30 of 108

Thread: 1UZ into MX22, more pics now.

  1. #16
    potato Automotive Encyclopaedia joecoolmk2's Avatar
    Join Date
    Feb 2006
    Location
    tasmania
    Posts
    790

    Default Re: 1UZ into MX22, more pics now.

    yay, it's there. how thick is that bit? i mean, do i have to drill right through to the sump, or is is only ~20mm thick then hollow?
    beer me!

  2. #17
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: 1UZ into MX22, more pics now.

    I tihnk its a plug
    Drill, tap, slide-hammer
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS

  3. #18
    potato Automotive Encyclopaedia joecoolmk2's Avatar
    Join Date
    Feb 2006
    Location
    tasmania
    Posts
    790

    Default Re: 1UZ into MX22, more pics now.

    what do you mean? isn't the dipstick tube pressed/tapped in? i thought it'd just tap in with an interference fit.
    beer me!

  4. #19
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: 1UZ into MX22, more pics now.

    Yes, but I'm pretty sure you are looking at a plug in the top of the head.
    Drill a small hole in it, tap the hole, put a bolt/screw in there, and use a slide hammer to pull it out.

    At least that is what I understood the setup to be.
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS

  5. #20
    potato Automotive Encyclopaedia joecoolmk2's Avatar
    Join Date
    Feb 2006
    Location
    tasmania
    Posts
    790

    Default Re: 1UZ into MX22, more pics now.

    no, it looks like part of the casting, i'll get a pic to show you.
    beer me!

  6. #21
    potato Automotive Encyclopaedia joecoolmk2's Avatar
    Join Date
    Feb 2006
    Location
    tasmania
    Posts
    790

    Default Re: 1UZ into MX22, more pics now.

    beer me!

  7. #22
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: 1UZ into MX22, more pics now.

    Nice and Clear!
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS

  8. #23
    potato Automotive Encyclopaedia joecoolmk2's Avatar
    Join Date
    Feb 2006
    Location
    tasmania
    Posts
    790

    Default Re: 1UZ into MX22, more pics now.

    here's my alternator tensioner, nothing flash, made it from the 4M tensioner. it's not quite the right radius, that's why the top hole is slotted. i might make it properly later on, at the moment i just wanna get it running. If anyone wants to do this, you'll need a dayco 6PK0750 rib belt.







    beer me!

  9. #24
    potato Automotive Encyclopaedia joecoolmk2's Avatar
    Join Date
    Feb 2006
    Location
    tasmania
    Posts
    790

    Default Re: 1UZ into MX22, more pics now.

    Quote Originally Posted by CrUZida
    Nice and Clear!

    hehe, yeah bit cramped and dark in there. it looks the same texture all over, definately cast.
    beer me!

  10. #25
    Yep they look great Carport Converter gianttomato's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    1,811

    Default Re: 1UZ into MX22, more pics now.

    Bummer. You'll need to do what I did to the 2JZ to make the dipstick work. Bit of a PITA. I used a threaded brass fitting with an untapped hole in the middle. Tapped a hole I drilled into the alloy corset of the sump and pressed some aluminium tube into the hole in the brass fitting. Then I gradually cut the top end of the aluminium tube till the dipstick poked thru to the right amount (when you compare it to the Soarer dipstick/sump). Make sure you make the appropriate cutout in the baffle plate before you bolt it all back together with silastic.

    Hey, what are you doing for the oil filter block? You using a Crown one or will the Soarer one clear the Mk2 subframe?

  11. #26
    potato Automotive Encyclopaedia joecoolmk2's Avatar
    Join Date
    Feb 2006
    Location
    tasmania
    Posts
    790

    Default Re: 1UZ into MX22, more pics now.

    Quote Originally Posted by gianttomato
    Hey, what are you doing for the oil filter block? You using a Crown one or will the Soarer one clear the Mk2 subframe?

    i'm making a custom one, but i haven't looked at a soarer one. where do they stick out? the one i got(celsior from what i can tell) stuck out towards the front and the filter fouled the swaybar.


    i almost forgot that the dipstick would need to have a bent tube cause of the different sump location. thanks for pointing that out, would've had fun trying to get the dipstick in... tap tap, what the...

    does anyone know the t/c stall speed of the crown? i'm lookin at getting a 3000rpm stall t/c.
    beer me!

  12. #27
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: 1UZ into MX22, more pics now.

    Soarer ones stick out to the front.
    Celsior ones point towards the factory mounts.
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS

  13. #28
    Yep they look great Carport Converter gianttomato's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    1,811

    Default Re: 1UZ into MX22, more pics now.

    I had to make a custom one to miss the chassis. The fittings point to the front.

  14. #29
    potato Automotive Encyclopaedia joecoolmk2's Avatar
    Join Date
    Feb 2006
    Location
    tasmania
    Posts
    790

    Default Re: 1UZ into MX22, more pics now.

    Quote Originally Posted by CrUZida
    Soarer ones stick out to the front.
    Celsior ones point towards the factory mounts.

    now i'm really confused, everything else on this motor suggested celsior, but if this is correct it might be a soarer motor. so, what colour are the soarer injectors? mine are grey. and my injector rails are machined alloy casts. and weren't those exhaust manifolds celsior ones?
    beer me!

  15. #30
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: 1UZ into MX22, more pics now.

    Dark Green are Soarer
    Light Purple are Celsior

    Celsior oil filter mount (can just see it)
    http://hotrodders.com/gallery/data/5...10_Medium_.jpg
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS

Similar Threads

  1. 1UZ bottom end bits
    By mrshin in forum Tech and Conversions
    Replies: 5
    Last Post: 25-07-2006, 07:58 PM
  2. 1uz Ms65. I Need Some Advise
    By AZZTOY in forum Tech and Conversions
    Replies: 21
    Last Post: 19-03-2006, 03:43 PM
  3. MX22 and MX13 conversion
    By cyprus73 in forum Tech and Conversions
    Replies: 3
    Last Post: 13-02-2006, 09:51 AM
  4. 1UZ into RA65 - Drift car.
    By nihilism in forum Tech and Conversions
    Replies: 40
    Last Post: 08-02-2006, 10:16 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •