anybody here, particularly those of u with a 4age have this coil. its listed by fuelmiser as being for the AE82 4AGE, but im running it on a 4k with internal ignitor.*

I was hoping someone could tell me what their coil resistance is between the high tension port and the positive terminal. This is known as the secondary coil resistance. Mine is reading only 6k ohms but i believe the std 4Age coils are up at*a minimum of 11k ohms, so imagine this replacent should be similar :/ but its not. the primary windings specs match just fine at 0.6 ohms.

however the 4k handbook (ke70) shows the stock dizzy specs as follows for the 4k

with igniter - 10-15k ohms

without ignitor - 8-12 k ohms.

now this is*getting close but i have an electronic distributor with internal ignitor, i so i guess that means high ohms (more spark) is needed from the small 0.5 ohms primary coil.

anyone have one (a fuelmiser cc215) that is relitively new they could test for me just to confirm that the one im running isnt just slightly shorted.



ive sent an email to fuelmisers parent company but not heard anything back

cheers