Results 1 to 2 of 2

Thread: MX83 Cressida turning signal issue

  1. #1
    Forum Member
    Join Date
    Oct 2017
    Location
    Florida
    Posts
    4

    Default MX83 Cressida turning signal issue

    Ok so the turning signal lever doesn't work on dash or on signals, But the hazards come on only on passenger side if the turning signal lever is set in the center position or turning left position if I put it in the turning right position they all flash?? Don't know what to try

  2. #2
    Forum Member
    Join Date
    Oct 2017
    Location
    Florida
    Posts
    4

    Default Re: MX83 Cressida turning signal issue

    I fixed it by wiggling the hazard button believe it or not, I guess it was "stuck" in a halfway position thus interfering with the turning signals ability to complete a circuit.

Similar Threads

  1. MX83 Series 2 1JZ-GTE non-VVTi Conversion issue.
    By Mr.Matt in forum Engine & Driveline Conversions
    Replies: 6
    Last Post: 20-04-2015, 03:37 PM
  2. mx83 1jz auto issue
    By jeffro in forum Tech and Conversions
    Replies: 31
    Last Post: 16-02-2014, 08:47 PM
  3. 1JZ MX83 hard to start (possible ECU issue?)
    By Packy in forum Tech and Conversions
    Replies: 8
    Last Post: 28-06-2013, 01:12 PM
  4. 1jz into MX83 Cressida A340 Issue
    By brady89 in forum Tech and Conversions
    Replies: 8
    Last Post: 16-01-2010, 05:41 PM
  5. Slight issue with TRW MX83 tierod ends
    By takai in forum Tech and Conversions
    Replies: 15
    Last Post: 27-10-2009, 10:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •