Hi All,
A friend of mine has bought a project car. Its a 1G-GTE that used to be an auto but now has a 5 speed manual box on it.
I've been and had a look at the car with the wiring diagram and found the ecu pin-out is different to the loom on his car and some of the cables need swapping.
Does anyone have the pin-out for the A/T? I just need to find out which cables to swap to which ports. I'll try add the photos I've go on my phone
Many Thanks
Itzuki
Link
Last edited by Itzuki; 09-10-2017 at 05:57 AM.
Generally, when swapping over from manual to auto all you need to worry about is the Neutral Safety Switch and reverse lights. If the conversion is all that was done and the engine was running before hand, just work on those and leave it alone.
It is common for there to have been different engine pinouts from Toyota depending on model or generation engine so unless you can pinpoint that down, it may be difficult sourcing the right pinout for your ecu.
Bookmarks