Results 1 to 11 of 11

Thread: WTB: W to m series bellhousing

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Jun 2017
    Location
    Sa
    Posts
    8

    Default WTB: W to m series bellhousing

    Hi I'm after a bellhousing to suit a 7mgte with a w57 need bellhousing and clutch fork thanks in advance

  2. #2
    Junior Member Automotive Encyclopaedia stidnam's Avatar
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    822

    Default Re: WTB: W to m series bellhousing

    May have one in the garage as I have a few w5x bellhousings. How do I identify it?

  3. #3
    Forum Member 1st year Apprentice
    Join Date
    Jun 2017
    Location
    Sa
    Posts
    8

    Default Re: WTB: W to m series bellhousing

    Hey mate I've found a pic of one the starters on the right hand side looking from the motor face and the clutch fork is just below it if that helps or just send a pic to me on 0400951233 cheers for your input been hunting for awhile now with no luck hope to hear from you

  4. #4
    Forum Member 1st year Apprentice
    Join Date
    Jun 2017
    Location
    Sa
    Posts
    8

    Default Re: WTB: W to m series bellhousing


  5. #5
    how much is Too Much Toyota JustenGT8's Avatar
    Join Date
    Oct 2005
    Location
    ACT
    Posts
    5,795

    Default Re: WTB: W to m series bellhousing

    You can have mine fir $40 plus post...no clutch fork unfortunately but go hydraulic slave cyl instead?
    Lily Simpson 6.7.2010
    R.I.P.

  6. #6
    Junior Member Automotive Encyclopaedia stidnam's Avatar
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    822

    Default Re: WTB: W to m series bellhousing

    cant see pic but if JustenGT8 has one then grab his? I probably also don't have a clutch fork but would have to check the forks I have

  7. #7
    Junior Member Automotive Encyclopaedia stidnam's Avatar
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    822

    Default Re: WTB: W to m series bellhousing

    Had a look and the bell housing that maybe a 7m one has the starter and clutch fork on the side you are describing but safer to get JustenGT8's one if he is sure it is 7m. The clutch forks I have aren't 7m as I have a few 125mm from centre of pivot point to centre of slave cylinder rod indent. Apparently you need 113mm as below

    notched = M, K (km36 G52), K A & T (only from 22spline T50) (shortest type) approx 113mm pivot to clutch slave
    straight = T (3tgte), G, C (ce71), (middle type) approx 118mm pivot to slave
    bent = R, S, C (cr30 G52), (longest type) approx 125mm pivot to slave

    SamQ sells 22 spline T50 forks and clips whch looks to be what you want but best to ask for measurements on the fork
    http://www.sq-engineering.com/replac...utch-fork.html
    http://www.sq-engineering.com/replac...clips-x-2.html

  8. #8
    Forum Member 1st year Apprentice
    Join Date
    Jun 2017
    Location
    Sa
    Posts
    8

    Default Re: WTB: W to m series bellhousing

    Hey mate sounds good I'll grab that bellhousing and slave I know where I can get a fork from anyway so where do we go from here sorry new to this site

  9. #9
    Forum Member 1st year Apprentice
    Join Date
    Jun 2017
    Location
    Sa
    Posts
    8

    Default Re: WTB: W to m series bellhousing

    Justengt8 here's my number 0400951233

  10. #10
    how much is Too Much Toyota JustenGT8's Avatar
    Join Date
    Oct 2005
    Location
    ACT
    Posts
    5,795

    Default Re: WTB: W to m series bellhousing

    No slave cyl either sorry although I have a few lying around that would probably suit....they are cheap as chips new though so better off with a new one I reckon...plus can buy the right ratio then to suit your master cyl and clutch throw?

    Anyways, pm me and we can sort out payment, freight etc
    Lily Simpson 6.7.2010
    R.I.P.

  11. #11
    Forum Member 1st year Apprentice
    Join Date
    Jun 2017
    Location
    Sa
    Posts
    8

    Default Re: WTB: W to m series bellhousing

    How do I pm you on here I can't find it message me on facebook if you'd like Erik Neil Miller

Similar Threads

  1. WTB. Series II T18 bellhousing or gearbox
    By ToyTA22 in forum Cars and Parts Wanted
    Replies: 1
    Last Post: 11-02-2017, 02:49 PM
  2. 4A to W Series bellhousing
    By Bazooka in forum Tech and Conversions
    Replies: 469
    Last Post: 04-05-2014, 07:42 AM
  3. A-series bellhousing to OLD T-series transmission
    By Toycrash in forum Engine & Driveline Conversions
    Replies: 12
    Last Post: 21-06-2008, 04:24 PM
  4. M series bellhousing/transmission interchangeability
    By just josh in forum Tech and Conversions
    Replies: 15
    Last Post: 03-04-2007, 08:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •