Gumtree there a few wrecking
Right im on the hunt for uprated Caldina st215 parts if anyone has anything let me know cheers.
Gumtree there a few wrecking
Ae 92 Sedan 20v operation jdm sedan
St 215 caldina daily
2000 lux mini work rig {staggered fitment rays three piece rims}
Ae 92 Seca sx sisters now
Ae 92 Levin sold and ae92 trueno sold
Unfortunately no bugger seems to reply
You can try ImportMonster and Buyee to get things.
So for the ST215W, use this link : http://www.importmonster.com.au/yahoo?cat=0&term=st215W
for the ST246, use this link : http://www.importmonster.com.au/yahoo?cat=0&term=st246W
Don't buy too much :-)
[No affiliation with ImportMonster]
cheers for that, it looks similar to jauce.com or rhdjapan.com
i parted out a few 215 half cuts and have a few left-overs
have quite a bit of new mechanical stuff
no bling, coilovers or such rubbish
call me if interested 0417-687161
Terry
sorry bud, its only aftermarket stuff im on the hunt for really.
Have you tried CALDINA 6POT 330×32 ST for street ?
http://www.importmonster.com.au/view...ion/g225504849
They just seem so awesome..
I ran K-sport 8 pots on my Caldina and 4 pots on the rear with Ferodo DS2500 pads as the standard K-sport pads are rubbish. Had to get front brake lines made as the supplied ones are too long but otherwise the brakes worked really well even with the car pushing 380awkw.
If in doubt power out
is this you Rona at Wakefield Park ?
https://www.youtube.com/watch?v=cnsJKiNuboY
If so, what's your best time now ?
Car never returned with the built motor and is now sold but yes that was me. Would have easily done sub 1:10 though. Biggest problem with the caldina for track work is unless running spacers and/or +20 or so offset rims on the rear you just can't get a decent tyre on. Even then you'd be cutting the guards and putting flares on. I had to roll the rears to stop the 215/45/17s rubbing, tried to put a 235/40/17 on the back and it fouled on the coilover spring so bad you couldn't put the wheel on. 235/40/17 fitted on the front no problem well just needed -3 degrees of camber which I wanted anyway.
If in doubt power out
Bookmarks