Nice.. so you just unplugs the jzs171 ecu and plug the jzx110 ecu? You did change and sensor? What about the what about the performance? And what about the e-shift do the jzx110 have it like the jzs171?
yes This ecu have immobilizer on it I. took the ecu to a repair shop keys They reset the Immobilizer chip and They program the is200 key .
Is your A/C pressure switch hooked in to the ecu / yes
gas in system / yes
engine temperature reading / yes
All gauge in cluster working properly
climate control system working properly Except the A/C not work
POWER/SNOW modes of auto trans working but not properly
cruise control / Not checked
Traction Control / Not checked
fuel Gauge working properly
MPG Gauge working properly
speed Gauge working properly
rpm gauge working properly
Nice.. so you just unplugs the jzs171 ecu and plug the jzx110 ecu? You did change and sensor? What about the what about the performance? And what about the e-shift do the jzx110 have it like the jzs171?
So far, no \
I received this message from George (Hi
I can make device to control 4 features of JZX110 ECU: idle up for elec. load, a/c , power/snow mode
It will not do anything to GXE10 dash or climate control unit
However I plan to begin working with Altezza things later)
I am thinking of getting a jzx110 ecu too from ebay I see 1 for $150us.
2 things will determining if i'll get the jzx110 ecu. I want to know if my old is200 eeprom immobilizer chip can be flash to the jzx110 ecu. And if the jzx110 ecu support e-shift (Paddle Shifter ) like the JZS171 ecu?
We dont have any place here dose this kind of thing so i will be doing it myself.
jzx110 ecu not support e-shift and i Notice if i drive slowly Transmission shifting Will be fast .
I think needs to change the JZS171 Transmission to jzx110. and Regarding the old is200 eeprom immobilizer chip I do not know I do not know if this method will succeed.
cruise control / working properly
Traction Control / Not function
any more update.. Are you sitll running the JZS110 ECU or you went back to the JZS171 ecu?? can i see the inside of your JZS110 ECU? (pic) i want to know how to do the eeprom things. i flash the eeproms on TVs ..
i find my tranny not shifting to 4th.. say if i am 3rd or 4th the RPM the same.
Bookmarks