What does the coded leters indicate just after the pin number?Originally Posted by Ashe
Reading through them all why are there so many seamingly pointless conections ie, stoplight fuse? tailight fuse? A/C magnitic clutch and a/c amplifier?
Also where you have marked as no wires I have wires, but they go nowhere.
I have no wires where the ECT is? What am I missing here? cruise control? and I'm assuming AT is Auto transmition, which is ok if the wires for that are missing.
thanks for any help,
nick.
Last edited by worldwalker; 26-01-2007 at 11:19 PM.
RA65 SCCA Car (looking for a decent swap)
NCP61 Daily Driver (pondering the practicalities of making it a SCP61)
1981 MS112 5M-E Crown wiring diagrams.
Sorry if their not real easy to read, but I had to join 3 scans together.
There are 2 sets, first set is for the engine, the second set is for the body.
Each set is in 2 parts, part 1/ the wiring index. 2/ the wiring diagram.
If you follow this link, you can download the full size image.
http://s144.photobucket.com/albums/r...Other%20Stuff/
Last edited by hi-ace; 27-01-2007 at 12:03 PM.
If it feels good "DO IT" Unless it harms others.(or upsets the RTA)
Enjoy what you have To Day,cause you can't take it with you.
My old Hi-Ace
the coded letters are what the wiring diagram calls the wire, and the wording after it is what the coded letters mean.Originally Posted by worldwalker
The Pinouts I listed are just what I extracted from the above mentioned wiring diagram, I cannot guarentee that the diagram matches the real world engine. However if the diagram is correct then my pinout will be correct, this I can promise. Are you sure you have the correct Gen engine/ecu?
Sorry I didn't notice your question the first time i looked
RA65 SCCA Car (looking for a decent swap)
NCP61 Daily Driver (pondering the practicalities of making it a SCP61)
if anyone needs supra wiring just message me, i got the technician guide can send u the full workshop manual on cd for 10 with everything or ill scan and photobucket the diagram on here
currently not piloting a toyota
still after cluster wireing for ae101 (4agze) any help would be apreciated.
cheers mike
I had 5 pages worth of photos and questions etc in a thread of mine for 18RG-EU wiring.
Here's the diagram I used which was posted up in that thread (I did not make this)
Also, a link to my thread, as its got a whole heap of questions and answers, everything you'll need to wire up an 18RG-EU from scratch! (Which is what I did)
http://www.toymods.net/forums/showth...=12506&page=2&
Bryce
Anyone got 1G-GZE with waste spark ignition... Specifically trying to research wiring of CAS...
meh...
it would be the same priciples as a 7mgte
i might have something somewhere
if i get motivated ill have a look
http://www.toymods.net/forums/showthread.php?t=16999Originally Posted by mic*
if its of any help?
e..er...
why i cannt access to "http://www.toymods.org.au/Repository/"?!
@.@
hey
just got my web directory up. diagrams/manual exetrs can be fund at the following address
http://www.mediavii.com.au/mikie
its mainly a collection of stuff i have found on forums and other websites in one convinient loaction.
i can add more if people are willing to send stuff to me.
cheers mike
Mikie's Yellow Money Suck (formally known as Green POO RA23) now 3S powered
The New Toy JZX100
http://fourdoori.wordpress.com
Wiring diagram for Tarago 4Y-E. (You'll need to blow it up to full size to read it properly)
And ECU pinouts and descriptions are attached.
All are done from scratch, so may need some polishing.
Hen
I need a working 4AGE bottom end. Pref smallport GZE, but all others considered. Also complete motors.
Drift Volvo. Was fun. 2JZ next time.
Hey guys, Sorry to bump this thread up agian does anyone know what happen to the 1jz-gte.us site??? it dosnt seem to work anymore need some wiring diagrams badly
-Sleeper 2J + R154 X83
-GQ 93 Mav, 4.2 Diesel, 35" BFG KM2's, 4" lift, 3" Exhaust, Front Locked, Rear shimmed, Sliders, IPF foggies, UHF, 2871R and Intercooled.
Bookmarks