Remove and replace lol
Its been covered a lot here, easier to search
Hey guys.
So i have a auto 1jz cressida.
Wondering what's involved and what I need to do a
Manual conversion. Only going to have light tasteful mods so plan on only using a rebuilt W58 box.
Remove and replace lol
Its been covered a lot here, easier to search
Tried searching but it's hard to find amongst all the other nonsense haha
Flywheel/clutch from a 2jzge JZA80
Gearbox from a MA70 (W58) or any non remote W58
JZ W58 bellhousing
Front section tailshaft from a manual MA70 (or get one made)
Clutch pedal setup - your choice, many options, none of which are bolt up
+ nuts, bolts, bit of wiring etc
Most people dont end up doing it because it costs about the same as it did to put the motor in or they look at whats required and throw it in the too hard basket. Cost wise is double for a R154 + bash trans tunnel with a hammer.
Im looking at buying everything and getting my local mechanic to do the conversion for me. Cheers for the info
Bookmarks