Results 1 to 5 of 5

Thread: 4age in ke25 Questions

  1. #1
    ......................... Carport Converter
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    1,401

    Default 4age in ke25 Questions

    Hey guys, as some of you mite know i have a 4age 16v in my ke25, at the moment i have gone turbo and working out a few things. I also upgraded to 4agze injectors and it has a distributor and coil setup. I have been trying to work out this wiring situation. So at the moment i just decided to put my old 4age 16v loom in and get it running on the stock computer. I know it is gonna be rough as hell but it would be good to see if it starts. My quesitons are:
    1) If it does run, would i be able to get a 4agze computer and plug that in straight away and run that? Or are the pins different for the different computer?
    2) If not, could i get a 4agze loom and computer then use that to run my engine?
    3) Would i have to switch to coil packs and ignitors if i run a 4agze loom and computer??
    Thanks guys,
    Michael
    Last edited by Megz; 13-05-2006 at 12:21 PM.

  2. #2
    jzx100 fan boy Domestic Engineer slide86's Avatar
    Join Date
    Nov 2005
    Location
    south australia
    Posts
    680

    Default Re: 4age in ke25 Questions

    considering there are a few varients on the 4age mangement, you would have to be careful as to which ECU and loom you were to run.
    things such as......
    - MAP vs AFM
    - Injector plugs
    - ECU plugs
    - CAS
    - DLi ignition

    are just a few things to think about. i would try to source a GZE loom and ECU. i think you will find that the GZE ECU will handle forced indiction alot better than the atmo ECU. although i think that the atmo ECU MAY be able to handle a small amount of boost.

    depending on the model loom that you get, you may be able to retain your dizzy. i think there was a model GZE that had a dizzy from factory
    Quote Originally Posted by The Witzl
    Please visit here, they will have all the answers you need for this "conversion" - www.hot4s.com.au

  3. #3
    ......................... Carport Converter
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    1,401

    Default Re: 4age in ke25 Questions

    I got gze coils, and i am getting ignitors. So it would just depend on map or AFM? Or if i get coils to i have to get dli for it?
    Michael

  4. #4
    jzx100 fan boy Domestic Engineer slide86's Avatar
    Join Date
    Nov 2005
    Location
    south australia
    Posts
    680

    Default Re: 4age in ke25 Questions

    yeah. you will need the crank angle sensor if you intend to use the dual coil setup
    Quote Originally Posted by The Witzl
    Please visit here, they will have all the answers you need for this "conversion" - www.hot4s.com.au

  5. #5
    ......................... Carport Converter
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    1,401

    Default Re: 4age in ke25 Questions

    Yeah i know that. I can existing one... Wat are DLI's again?
    MIchael

Similar Threads

  1. 4AGE -> AE86 Conversion: Accessories question
    By Wiggles in forum Tech and Conversions
    Replies: 21
    Last Post: 17-06-2008, 08:53 PM
  2. 4AGE head on 4ac block
    By Dylan_ae86 in forum Tech and Conversions
    Replies: 1
    Last Post: 09-05-2006, 07:33 PM
  3. 4AGE cooling system - an observation
    By roadsailing in forum Tech and Conversions
    Replies: 1
    Last Post: 18-12-2005, 11:01 AM
  4. 20v 4AGE into AE92
    By dale_8888 in forum Tech and Conversions
    Replies: 1
    Last Post: 16-12-2005, 04:51 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •