Page 4 of 7 FirstFirst ... 23456 ... LastLast
Results 46 to 60 of 105

Thread: converting corolla from 4x100 to 5x114

  1. #46
    Your mum is a Conversion King TERRA Operative's Avatar
    Join Date
    Mar 2007
    Location
    Chiba
    Posts
    2,232

    Default Re: converting corolla from 4x100 to 5x114

    Nah, I haven't done anything further as I found a nice set of Enkei GTC01's in 17" that will fit nicely. About $1500 or so for a set shipped from the states.

  2. #47
    Forum Member Grease Monkey ap7's Avatar
    Join Date
    Sep 2006
    Location
    NSW
    Posts
    62

    Default Re: converting corolla from 4x100 to 5x114

    Jared

    is it possible to re drill the SS hubs to 5x100 or 5x114.3?

  3. #48
    Your mum is a Conversion King TERRA Operative's Avatar
    Join Date
    Mar 2007
    Location
    Chiba
    Posts
    2,232

    Default Re: converting corolla from 4x100 to 5x114

    I guess so, but it would be better to adapt something from a Celica or the like (lathe it to size etc) or just make new hubs from scratch.

    The Bomex AE101 Levin has been converted and from the translations, I gathered they had adapted Celica hubs to the super strut gear.

  4. #49
    Forum Member Grease Monkey ap7's Avatar
    Join Date
    Sep 2006
    Location
    NSW
    Posts
    62

    Default Re: converting corolla from 4x100 to 5x114

    I know that the super struts use the Corona wheel bearings...

    Does anyone know if the newer corolla hubs can be put in the Levin with super struts?

    I really need to sort this out soon as my rc2 18x8.5 5x100 wheels will be here on Thursday!

  5. #50
    Your mum is a Conversion King TERRA Operative's Avatar
    Join Date
    Mar 2007
    Location
    Chiba
    Posts
    2,232

    Default Re: converting corolla from 4x100 to 5x114

    You might have to visit a wrecker with a set of vernier calipers... That was my plan.

  6. #51
    Forum Member Grease Monkey ap7's Avatar
    Join Date
    Sep 2006
    Location
    NSW
    Posts
    62

    Default Re: converting corolla from 4x100 to 5x114

    if i only had that skill base and tools...i am ok for theory but practical...that is another story!

  7. #52
    Junior Member Grease Monkey
    Join Date
    Sep 2009
    Location
    QLD
    Posts
    181

    Default Re: converting corolla from 4x100 to 5x114

    I would be looking at 90s camrys with the 5x100 stud pattern. The cv joint spline is the same as corolla ( 4agze ae101 has camry cv) I need to see one in the flesh to see how the offset and bearing diameters match up.
    Anyone in brisbane have a camry hub? I can press it out etc.

    Corey

  8. #53
    Toymods Board Member Chief Engine Builder Hiro's Avatar
    Join Date
    Apr 2006
    Location
    NSW
    Posts
    3,078

    Default Re: converting corolla from 4x100 to 5x114

    Quote Originally Posted by Xauterus View Post
    I would be looking at 90s camrys with the 5x100 stud pattern
    Camrys went to 5x114.3 with the widebody SXV10 in 1993, by the way...
    AE102 - Charlene the Old Faithful, Reborn
    JZZ30 - Lexi the Spacecruiser, 1JZGTE>>3SGE. 200rwkw, hunting Skylines and n00bs in SS Commodores
    ST162 - Charlie the non-ghey Celica, 3SGE>>4AGE. GOOOOOOOONE
    AE82 - Rosie the Bitsa from Hell, 70.8kw atw. Has been converted into garage space and money at last
    KE55 - Billie the Beast, sadly missed

  9. #54
    Junior Member Grease Monkey
    Join Date
    Sep 2009
    Location
    QLD
    Posts
    181

    Default Re: converting corolla from 4x100 to 5x114

    I think that is still the 90s

  10. #55
    Toymods Board Member Chief Engine Builder Hiro's Avatar
    Join Date
    Apr 2006
    Location
    NSW
    Posts
    3,078

    Default Re: converting corolla from 4x100 to 5x114

    Quote Originally Posted by Xauterus View Post
    I think that is still the 90s
    Granted, but since the majority of the 90s Camrys weren't 5x100, it is important to make the clarification/distinction...
    AE102 - Charlene the Old Faithful, Reborn
    JZZ30 - Lexi the Spacecruiser, 1JZGTE>>3SGE. 200rwkw, hunting Skylines and n00bs in SS Commodores
    ST162 - Charlie the non-ghey Celica, 3SGE>>4AGE. GOOOOOOOONE
    AE82 - Rosie the Bitsa from Hell, 70.8kw atw. Has been converted into garage space and money at last
    KE55 - Billie the Beast, sadly missed

  11. #56
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: converting corolla from 4x100 to 5x114

    You could re-drill the front drive flange to 5x100, but im not sure how strong they would be as the holes get really close together.
    The rear how ever ther eisnt enough material on the stub to do so.

    You will have to get a billet stub made for the rear. There is really no other way around it.

    You cant move to 5x114.3 as the flange diameter isnt large enough to accommodate 114.3mm. + You disc brakes would not fit over a axle stub of 114.3mm.

    The fronts probably even a Celica drive flange would fit and that would be 5x100.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  12. #57
    Junior Member Grease Monkey
    Join Date
    Apr 2010
    Location
    SA
    Posts
    99

    Default Re: converting corolla from 4x100 to 5x114

    these have blank centers with various offsets.

    Koya Wheel

    Koya Wheel

  13. #58
    Forum Member Grease Monkey ap7's Avatar
    Join Date
    Sep 2006
    Location
    NSW
    Posts
    62

    Default Re: converting corolla from 4x100 to 5x114

    Finally pulled drivers side front and rear hubs....now to see if anyone has figured out how to do the conversion...

    Pics below:










  14. #59
    Forum Member Grease Monkey ap7's Avatar
    Join Date
    Sep 2006
    Location
    NSW
    Posts
    62

    Default Re: converting corolla from 4x100 to 5x114

    Went and bought SV21 Camry front hubs today and it is a match for Ae101 Trueno/Levin with Superstrut Suspension! Now for the rears...anyone with any suggestions?










  15. #60
    Your mum is a Conversion King TERRA Operative's Avatar
    Join Date
    Mar 2007
    Location
    Chiba
    Posts
    2,232

    Default Re: converting corolla from 4x100 to 5x114

    Effing-aye.

    Is the spline count and bearing seat the same?

Similar Threads

  1. Leaf Corolla spring saddle insulator rubbers?where to get??
    By Aust162 in forum Tech and Conversions
    Replies: 6
    Last Post: 09-03-2013, 02:52 PM
  2. Toyota Corolla Ceres GT engine 4AGE 20V to Corolla EE100
    By mitman in forum Tech and Conversions
    Replies: 9
    Last Post: 07-06-2010, 12:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •