Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 37

Thread: Aftermarket ECU maps for 7MGTE

  1. #16
    Junior Member Carport Converter ecko's Avatar
    Join Date
    May 2007
    Location
    tasmania
    Posts
    1,415

    Default Re: Aftermarket ECU maps for 7MGTE

    how will a adaptronic tune work on a haltech?

  2. #17
    Hopefully soon a 5S-GTE Chief Engine Builder MWP's Avatar
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,565

    Default Re: Aftermarket ECU maps for 7MGTE

    It wont.
    Well... the ignition map could be manually copied across, but the fuel map could only be used as a rough reference.

  3. #18
    Not in the diner Alf! Conversion King RyleyMA61's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    2,159

    Default Re: Aftermarket ECU maps for 7MGTE

    yeah i was going to manually copy both figures for X load at X rpm, and then richen and retard the fuel and timing respectively to get it safe

    just so i can drive 15 mins down the road to the dyno and get the thing started and running

  4. #19
    Hopefully soon a 5S-GTE Chief Engine Builder MWP's Avatar
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,565

    Default Re: Aftermarket ECU maps for 7MGTE

    Nope you wont be able to straight copy the values for the fuel map.
    For the ignition map, yes, but not the fuel map.
    The values mean pretty much nothing between different brands (and even types) of ECUs.

    You need a proper Haltech base map.

  5. #20
    Junior Member Carport Converter ecko's Avatar
    Join Date
    May 2007
    Location
    tasmania
    Posts
    1,415

    Default Re: Aftermarket ECU maps for 7MGTE

    well mine should siut then, motor is standard albut recently rebuilt, tune is for 7psi so should be fine only prob may be its a e6x not the e11

  6. #21
    Not in the diner Alf! Conversion King RyleyMA61's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    2,159

    Default Re: Aftermarket ECU maps for 7MGTE

    Quote Originally Posted by MWP View Post
    Nope you wont be able to straight copy the values for the fuel map.
    For the ignition map, yes, but not the fuel map.
    The values mean pretty much nothing between different brands (and even types) of ECUs.

    You need a proper Haltech base map.
    that's crazy, i didn't know that! i know the haltech has the values in mS, so I just assumed from there?

    Thanks mate, good info

    Ecko- Mine is prety much standard (bigger turbo, injectors, boost) so will be quite helpful. I'm pretty sure the E11v2 can import E6X maps!

    Thanks all, rep given

  7. #22
    Junior Member Carport Converter ecko's Avatar
    Join Date
    May 2007
    Location
    tasmania
    Posts
    1,415

    Default Re: Aftermarket ECU maps for 7MGTE

    just waiting for the cable to turn up mate should turn up today hopefully

  8. #23
    Not in the diner Alf! Conversion King RyleyMA61's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    2,159

    Default Re: Aftermarket ECU maps for 7MGTE

    that'd be awesome man thanks

  9. #24
    Junior Member Carport Converter ecko's Avatar
    Join Date
    May 2007
    Location
    tasmania
    Posts
    1,415

    Default Re: Aftermarket ECU maps for 7MGTE

    didnt turn up soon hopefully

  10. #25
    Junior Member Carport Converter ecko's Avatar
    Join Date
    May 2007
    Location
    tasmania
    Posts
    1,415

    Default Re: Aftermarket ECU maps for 7MGTE

    cable turned up but i cant get it the pc to communicate with the haltech,
    halwin just stays in offline mode

  11. #26
    Not in the diner Alf! Conversion King RyleyMA61's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    2,159

    Default Re: Aftermarket ECU maps for 7MGTE

    hmmm thats a bit gay! what version of windows and halwin are you using? you might need some software thing to make the haltech software look at the usb port rather than serial, ie trick it... maybe ring haltech?

    thanks though mate

    can anyone tell me what tooth offset and trigger angle they are using for the stock 7m CPS?

  12. #27
    Junior Member Carport Converter ecko's Avatar
    Join Date
    May 2007
    Location
    tasmania
    Posts
    1,415

    Default Re: Aftermarket ECU maps for 7MGTE

    using windows 7 but it should work

  13. #28
    Low rep 1st year Apprentice
    Join Date
    Feb 2010
    Location
    western australia
    Posts
    49

    Cool Re: Aftermarket ECU maps for 7MGTE

    Dont suppose you have a 8860 base map for a 4agze ?

  14. #29
    Junior Member Carport Converter ecko's Avatar
    Join Date
    May 2007
    Location
    tasmania
    Posts
    1,415

    Default Re: Aftermarket ECU maps for 7MGTE

    nope,
    but i cannot get halwon to talk to the haltech

  15. #30
    Not in the diner Alf! Conversion King RyleyMA61's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    2,159

    Default Re: Aftermarket ECU maps for 7MGTE

    that's really weird... i had trouble back in the day with an E6, i had to restart in msdos mode... don't think windows 7 and halwin wouild like that though haha

    check com port - usb drivers, and what com port it is using?

Similar Threads

  1. 1UZ aftermarket ECU option??
    By Wildsupra in forum Tech and Conversions
    Replies: 74
    Last Post: 04-08-2011, 08:07 PM
  2. 1GGTE TVIS + Aftermarket ECU and BB Turdbro
    By Kedderz in forum Tech and Conversions
    Replies: 91
    Last Post: 31-01-2009, 08:18 PM
  3. 3sgte ecu error code??? and afm????
    By paulioq in forum Tech and Conversions
    Replies: 2
    Last Post: 30-09-2008, 02:55 PM
  4. 1jz Aftermarket Ecu
    By thommo in forum Tech and Conversions
    Replies: 25
    Last Post: 27-01-2006, 09:09 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •