Results 1 to 7 of 7

Thread: Ae86 zenki diff LSD spidergears?

  1. #1
    Forum Member Grease Monkey
    Join Date
    Dec 2018
    Location
    Alvsborg
    Posts
    69

    Default Ae86 zenki diff LSD spidergears?

    Hello! im wondering about the spidergearset in the LSD diff.

    My is really worn out right now and i cant seem to find any new replacement gears for it. So started to look around and cant slim to non info about them?

    Did some looking on partnumbers and found that it seems to be the same spidergearset in the lsd as in the open gear T diff? is this true and can i swap them over?

    https://www.megazip.net/zapchasti-dl...tial-17977418# (the LSD diff partset)
    https://www.megazip.net/zapchasti-dl...ntial-17960050 (A open diff in a rwd carina T-diff)

    Otherwise is there any other place i can get a hold of the spidergears?

    Thankfull for all help.. dont want to buy a whole new LSD.

  2. #2
    Junior Member Backyard Mechanic
    Join Date
    Aug 2009
    Location
    NSW
    Posts
    402

    Default Re: Ae86 zenki diff LSD spidergears?

    Quote Originally Posted by Ceasar View Post
    Hello! im wondering about the spidergearset in the LSD diff.

    My is really worn out right now and i cant seem to find any new replacement gears for it. So started to look around and cant slim to non info about them?

    Did some looking on partnumbers and found that it seems to be the same spidergearset in the lsd as in the open gear T diff? is this true and can i swap them over?

    https://www.megazip.net/zapchasti-dl...tial-17977418# (the LSD diff partset)
    https://www.megazip.net/zapchasti-dl...ntial-17960050 (A open diff in a rwd carina T-diff)

    Otherwise is there any other place i can get a hold of the spidergears?

    Thankfull for all help.. dont want to buy a whole new LSD.
    Part number I can find are from 5/83- but the later kouki was used from about 8/83 onward which I found on toyodiy. The problem there is the kouki has 25mm splines, the zenki has 24mm splines.

  3. #3
    Forum Member Grease Monkey
    Join Date
    Dec 2018
    Location
    Alvsborg
    Posts
    69

    Default Re: Ae86 zenki diff LSD spidergears?

    Yeah the problem is that my rear axle will (only?) take zenki wheel bearing and axels? So would really like to find spiderset for zenki.

  4. #4
    Junior Member Backyard Mechanic
    Join Date
    Aug 2009
    Location
    NSW
    Posts
    402

    Default Re: Ae86 zenki diff LSD spidergears?

    I meant to say, have you tried ordering them through megazip? I have dealt with them for a few discontinued parts and had no problems, if they don't haveitems tgey refund your money back through paypal. I tried the numbers on amayama.com and the number 41331-14010, which is zenki gears cost $177.07 AUD each plus post if available from their suppliers.

  5. #5
    Forum Member Grease Monkey
    Join Date
    Dec 2018
    Location
    Alvsborg
    Posts
    69

    Default Re: Ae86 zenki diff LSD spidergears?

    Oh sorry misunderstood, English it not my native.
    Haven't check it but seems promising. Saw now that the open diff had a little bit different number so Im guessing megazip will be my only option but its sad that a whole gearset plus import/shipping will be close to a new LSD.

  6. #6
    Junior Member Backyard Mechanic
    Join Date
    Aug 2009
    Location
    NSW
    Posts
    402

    Default Re: Ae86 zenki diff LSD spidergears?

    Yes, the problem with classic vehicles is getting parts. I have a zenki T series centre in my shed and been trying to buy clutch packs for it without any luck. I need to use a zenki centre for my TA22 due to 24mm axles. Occasionally after market lsds, such as Kaaz, Tomei etc come up on ebay at reasonable cost.
    Last edited by ToyTA22; 07-08-2019 at 09:28 PM.

  7. #7
    Forum Member Grease Monkey
    Join Date
    Dec 2018
    Location
    Alvsborg
    Posts
    69

    Default Re: Ae86 zenki diff LSD spidergears?

    haha so you feel my pain then. Yeah im putting mine in a Ta40 axle. Prob just keep an eye out overtime and hope that something come up. Or do you want to sell your spiderset?

Similar Threads

  1. Bodykit fitment to Zenki AE86
    By sirsprinter in forum Tech and Conversions
    Replies: 0
    Last Post: 09-02-2016, 11:08 PM
  2. Zenki LSD into RA23
    By RA23GT in forum Tech and Conversions
    Replies: 11
    Last Post: 16-05-2014, 03:17 PM
  3. help AE86 diff (jig) N.S.W
    By joel in forum Tech and Conversions
    Replies: 3
    Last Post: 13-08-2009, 06:33 PM
  4. Diff hum in AE86
    By robert1 in forum Tech and Conversions
    Replies: 7
    Last Post: 24-09-2007, 07:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •