myself and a close friend are very keen, i already have a gen 3 crank, god willing its useable, and i found another one for my mate so put us down for two in SA
will check interest in SASupra as well
keep u informed mate
K_S
I've been getting more and more pm's, emails and calls from people saying they think they'd like to get in on this stroker kit. As per original post, we need 5 people to make up the numbers for the prces given. Any number over that won't be any cheaper, thats the cheapest price for the pstons and rods, unless we maybe had 10 sets, which I can't see happening.
If you are interested, or know people that are, please state your genuine interest here so we can get a list happening, due to lack of numbers when this thread first started, it has died off a bit, but is not forgotten, I'm trying to work my ass off before christmas to get all my work done to have 2 weeks off, but this stroker will go ahead in january, I'd say mid to late, probably take deposits around the 21st and expect about 4-6 weeks before final payment would be needed. And don't forget people, you need a Gen 3 crank to send me!!
6BOOST
myself and a close friend are very keen, i already have a gen 3 crank, god willing its useable, and i found another one for my mate so put us down for two in SA
will check interest in SASupra as well
keep u informed mate
K_S
i live in the uk so shipping the crank could be a little costley lol i can get my machine work done here but woulld need to know the specs would that be an issue so it would be rods and pistons that i am interested in
thanks
steve
Group A 7M MA61
still down for a set, still looking for a healthy crank
GA23(never finished-now with cracked block ) JZX83 (Tyre eater) 3sgte AE86. by now i should know better.
im in.
when do you want cranks? seeings as so many like to crack... i wanna make sure mine is right to use, it has a slightly spun bearing, but looks alright.
MY RIDE, 2 Door LHD KE70 sedan with 1G HKS stroker: http://www.toymods.org.au/forums/showthread.php?t=51760
Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'
can anyone find lots of gen 3 cranks?
Previous Rides: JZA80, GA70 GT, RA63 GT x2, TA61 GT, TA63.
I have no problems in supplying just pistons and rods, and a detailed explaination of machining, it won't effect everyone elses prices at all so thats fine and will save a lot of stuffin around to the UK.
I can get cranks crack tested if your in QLD pretty much anytime, best bet would be call me and I'll tell you where to send it, think its only $40 and they know where to look for them on the 1G as they've done the 6-8 that I've sent them and were cracked
6BOOST
EDIT: DOH I JUST READ THE POST ABOUT THE DELIVERY TIME. THINK THAT MEANS I AM OUT
----
When is this looking like it is goin down?
I am quite keen but do not have the cash as yet.
I would probably be looking at the lower powered setup if that is still goin ahead also.
Also with the crank, what am I looking at to buy one of these gen 3 bad boys.
also where would I need to look.
Is it possible to supply and include the crank in the price for the kit?
(Not trying to be lazy but just thought this maybe easier to get up the (I'm in Vic) and save on postage & buggering around.)
Thanks in advance
MaT
ill take a burger with the lot thanks
MY RIDE, 2 Door LHD KE70 sedan with 1G HKS stroker: http://www.toymods.org.au/forums/showthread.php?t=51760
Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'
Here is a sneak peak of the insides of my engine, along with my coated sump. Now of not is that my engine has an external oil pump, and it sucks out of the sid eof the sump. In this case, my girdle covers the oil pickup hole in the block, if you wanted to run your normal pickup, you would need to remove this "bar" or side piece of the girdle, which will do bugger all to strength, the thing is 12mm thick, flacons and other engines have similar setups and have pieces missing, as do many aftermarket billet chev girdles.
Anyway, behold all my 1G secrets and goodness
I have a few more, but don't want to clutter up this thread. I'll start another one and post a link.
6BOOST
Hey kyle... Pics might be a little large for most people.
Do you know how to resize them at all?
There is no windage tray to acompany the girdle Kyle? This could be considered another option perhaps....
Otherwise, very nice
i want one !!!!!!
K_S
add me in
offset ground Gen 3 crankshaft
1. Karma_Supra
2.
3.
4.
5.
6.
7.
8.
9.
10.
H beam conrods
1.group a supra
2.celicapain
3. Karma_Supra
4.
5.
6.
7.
8.
9.
10.
custom 77mm CP pistons
1.group a supra
2.celicapain
3. Karma_Supra
4.
5.
6.
7.
8.
9.
10.
full set of bearings
1.group a supra
2.celicapain
3. Karma_Supra
4.
5.
6.
7.
8.
9.
10.
main stud kit
1.group a supra
2.celicapain
3. Karma_Supra
4.
5.
6.
7.
8.
9.
10.
12mm thick laser cut main girdle
1. group a supra interested would like to see pics
2. celicapain-(depending on price)
3. Karma_Supra
4.
5.
6.
7.
8.
9.
10[/QUOTE]
lemme know how much all this is now
K_S
why isnt someone editing the original post? its gonna get long and tedious if everyone adds another list...
MY RIDE, 2 Door LHD KE70 sedan with 1G HKS stroker: http://www.toymods.org.au/forums/showthread.php?t=51760
Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'
Bookmarks