Page 1 of 4 123 ... LastLast
Results 1 to 15 of 48

Thread: 1uz + Corona?

  1. #1
    Gorilla Industries Conversion King Koffee-Black's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    2,838

    Default 1uz + Corona?

    Would i be talking in the clouds here if i wanted to shove a 1uzfe in an rt142 corona?
    JZA80 Turbo Time Attack Car - "Gorilla"
    JZA80 Turbo Street Car - "Silver Back"
    Lexus RX350 F Sport "Kid Hauler"
    Vitz - Supercharged "Chimp"
    HDJ80 Landcruiser "Baboon"

  2. #2
    no backyard Domestic Engineer japlish's Avatar
    Join Date
    Nov 2005
    Location
    qld
    Posts
    470

    Default Re: 1uz + Corona?

    i've seen a picture of one in a ke70, so i guess its do-able...at a price of course
    Destroyer of 'Drop Forged' spanners

  3. #3
    Yep they look great Carport Converter gianttomato's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    1,811

    Default Re: 1uz + Corona?

    Rack and pinion already there, tranny tunnel will accomodate a W58, F series diff.

    Measure the space between the strut towers, if 670mm or more you'll be right. I'm guessing you'll need a front sump motor and you may need to do some fancy stuff with extractors on the driver's side.

    It's a bit out there but not in the realms of impossible.

  4. #4
    Gorilla Industries Conversion King Koffee-Black's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    2,838

    Default Re: 1uz + Corona?

    thanks giant.

    Ok, who wants to do this for me? I can supply two cases of crownies haha.
    JZA80 Turbo Time Attack Car - "Gorilla"
    JZA80 Turbo Street Car - "Silver Back"
    Lexus RX350 F Sport "Kid Hauler"
    Vitz - Supercharged "Chimp"
    HDJ80 Landcruiser "Baboon"

  5. #5
    Yep they look great Carport Converter gianttomato's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    1,811

    Default Re: 1uz + Corona?

    Actually now that I think about it, I might be wrong about that F series diff.

    You'll obviously need a bellhousing/flywheel to suit. Mounting could be done over a weekend I would have thought.
    Last edited by gianttomato; 26-04-2007 at 01:41 PM.

  6. #6
    Party Animal Supreme Too Much Toyota MR 1JZ's Avatar
    Join Date
    Sep 2005
    Location
    South Australia
    Posts
    6,576

    Default Re: 1uz + Corona?

    IRS rear end has the F series Im pretty sure
    Project Soarer II - Sold
    Evo 5 - The silver fruitbox
    "I'm the man who has the ball. I'm the man who can throw it faster than f**k. So that is why i am better than everyone in the world. Kiss my ass and suck my dick... everyone."

  7. #7
    Junior Member Too Much Toyota
    Join Date
    Sep 2005
    Location
    Qld
    Posts
    5,590

    Default Re: 1uz + Corona?

    RT142 has T-series in the IRS - you'll get plenty of practice changing them if you went 1UZ


    edit: this is wrong - am obsessed with T-series diffs for some reason.... it should be F-series.
    Last edited by thechuckster; 26-04-2007 at 04:03 PM. Reason: me = idiot
    ------------------------------
    ST185 road barge / MZ11 forest barge / RA65 garage barge

  8. #8
    MR 18RG Chief Engine Builder The Witzl's Avatar
    Join Date
    Jul 2005
    Location
    NSW
    Posts
    3,164

    Default Re: 1uz + Corona?

    Quote Originally Posted by thechuckster
    RT142 has T-series in the IRS - you'll get plenty of practice changing them if you went 1UZ
    O RLY??

    I was under the impression, with a vaigue recollection of reading a build plate, that the RT142 *imported* Avante model had the IRS rear end with an F-series open diff centre.

    I'm pretty sure of that too.


    Anyway, this would be a nifty conversion.... and would make a hella skid-machine.
    ...... butt scratcher?!


  9. #9
    Toymods Pimp Chief Engine Builder Norbie's Avatar
    Join Date
    Aug 2005
    Location
    QLD
    Posts
    3,806

    Default Re: 1uz + Corona?

    Quote Originally Posted by thechuckster
    RT142 has T-series in the IRS - you'll get plenty of practice changing them if you went 1UZ
    Nope, RT142 is F series IRS (fully imported) or Borg Warner live axle (locally assembled). Obviously the latter will explode on a regular basis, so make sure you get an IRS version. If it's manual it will already have a W57/8 in it and a good diff ratio (3.58:1).

    As for fitting the engine, it's been done in an RA6x Celica and the RT142 engine bay is very similar so I'm sure it will go in without too many dramas.

  10. #10
    MR 18RG Chief Engine Builder The Witzl's Avatar
    Join Date
    Jul 2005
    Location
    NSW
    Posts
    3,164

    Default Re: 1uz + Corona?

    RT142 has a W55 in it.

    Bog warmer diffs will definitely explode spontaneously upon starting the engine.
    ...... butt scratcher?!


  11. #11
    Gorilla Industries Conversion King Koffee-Black's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    2,838

    Default Re: 1uz + Corona?

    cool, mines an auto, with irs. Got no idea regarding what diffs etc hehe.

    Hmm, myabe a 2jzge? I wanna leave it auto tho.
    JZA80 Turbo Time Attack Car - "Gorilla"
    JZA80 Turbo Street Car - "Silver Back"
    Lexus RX350 F Sport "Kid Hauler"
    Vitz - Supercharged "Chimp"
    HDJ80 Landcruiser "Baboon"

  12. #12
    Junior Member Too Much Toyota
    Join Date
    Sep 2005
    Location
    Qld
    Posts
    5,590

    Default Re: 1uz + Corona?

    agh... my bad ... i thought there was an IRS with a T-series centre ... me = idiot.
    ------------------------------
    ST185 road barge / MZ11 forest barge / RA65 garage barge

  13. #13
    Toymods Pimp Chief Engine Builder Norbie's Avatar
    Join Date
    Aug 2005
    Location
    QLD
    Posts
    3,806

    Default Re: 1uz + Corona?

    You're probably thinking of the SA63 Celica.

  14. #14
    Yep they look great Carport Converter gianttomato's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    1,811

    Default Re: 1uz + Corona?

    So there you go. You have all the info. All you need now is the half cut, half a tank of petrol and $50 for those incidentals .

  15. #15
    Gorilla Industries Conversion King Koffee-Black's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    2,838

    Default Re: 1uz + Corona?

    lol, that simple Giant?? Who in syd would i take it to? I could just use the ecu from the 1uz right? What about aircon etc?
    JZA80 Turbo Time Attack Car - "Gorilla"
    JZA80 Turbo Street Car - "Silver Back"
    Lexus RX350 F Sport "Kid Hauler"
    Vitz - Supercharged "Chimp"
    HDJ80 Landcruiser "Baboon"

Similar Threads

  1. 1uz ITB manifold adapter plate .dxf file
    By ed in forum Tech and Conversions
    Replies: 42
    Last Post: 29-10-2021, 10:49 AM
  2. Replies: 23
    Last Post: 29-04-2007, 01:18 PM
  3. ST171 Corona running celica GT4 hardware?
    By cylinderhead in forum Tech and Conversions
    Replies: 2
    Last Post: 14-07-2006, 12:43 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •