FWD 4age turbo manifolds,, anyone make them??

[4AGZE_rolla]

firstly sorry if im in the wrong section?? didnt quite know where to post it up??
as the title says i am after a 4AGE manifold! will most manifolds do the job i.e if i got a exhaust place to make me one up?? or will a specific design be better??( its not like im chasing record power though)
if anyone can make one up for me i would be well interested!! i have T25G and am in need of a dump and exhaust manifold!!
Cheers guys!!!

[slide86]

there are heaps of different ways to go.

you can go on ebay and get one from there (they are a bit "cheap" tho)

getting an exhaust shop to make one would be better, but cost more. at least then they can modify it if it needs to clear anything. Also it will need to have adequate space to clear the radiator.

just tell them you have a t25 and they will be able to adapt the correct flange to suit your turbo.

[Grega]

www.hksusa.com
look up part number 17141-141158
this was a T25 flanged turbo manifold ; cast by HKS.

otherwise grab some steam pipe bends and make your own or as slide86 has suggested get a zorst shop to make you one!

[mullett]

Here's a start All the flanges

http://www.toymods.net/forums/showthread.php?t=25695

RM.

[MAD79R]

Racers Choice in Artisan rd Seven Hills i highly recomend them

[Kebin]

i recommend performance exhaust center in northmead. The guy there makes awesome manifolds for anything u can throw at him.

[jeffro ra28]

laid my hands on a cast HKS item a few weeks ago. Probly pick one up for around the $300 mark.

Seemed liked a very good design to me.

[Cuzzo]

Why not try the toymods sponsors. Roadrunner are great.Linden is a top bloke.

Look in the sponsor section or google roadrunner fabrications

[30psi 4agte]

There is also the Ebay specials that myself and cuzzo are using.!

I couldnt be more happier with mine and have had no probs with cracking etc.

[Cuzzo]

There is also the Ebay specials that myself and cuzzo are using.!

I couldnt be more happier with mine and have had no probs with cracking etc.

Same. No cracking here and damn cheap.

However not FWD friendly. I have seen one of these used in an AE82 and he had to cut the bonnet to fit the manifold. However a bit of welding and cutting would fix this with ease.

[30psi 4agte]

/\/\/\/\/\/\/\/\
Hmmm i thought they were to suit a fwd Hence the reason the ones like yours that have the external gate fitting towards the front.... which would suit fwd.

[Lachie]

Nah, they advertise them for sprinters. I always wondered if they would clear the bonnet in FWD, but like other poeple said, you could modify them to fit.