Hi Guys.
Im about to wire a Microtech LT10s and X4 box into my 4agte. The ecu is configured for this setup.
I have gone from the GZE twin coils to four 1NZ COP arrangement. Im not sure as to how the X4 box and coils will go, as the coils have an igniter in them already?
Do I just wire the 4 channels coming from the X4 box into the 4 coil inputs? And there is no info as to which wire is which cyl coming out of the X4 box.......Why have Microtech done this?
Or use the direct 4 channels from the ECU and dont use the X4 box at all. Again I dont know which cyl is which as they dont label those 4 wires. Can anyone help there? They are all grey.
Originally Posted by The Witzl
u should not need to x4 box as the 1nz coils have inbuilt ignitor don't they
got microleb website and look at diagrams for the ignition outputs
and maybe ask a tuner for what dwell time u should have
do u have a handset for the microtech
Bookmarks