Results 1 to 15 of 15

Thread: 2zj-ge Ecu pinouts and wiring diagram

  1. #1
    Junior Member Backyard Mechanic
    Join Date
    Jun 2006
    Location
    Tasmania
    Posts
    234

    Default 2zj-ge Ecu pinouts and wiring diagram

    Hey guys, i know there is a thread dedicated to wiring diagrams but no help as yet and this is very urgent.

    Engine is in a st141 corona and is near ready to hit the key bar a few wires that need connecting at the ecu like the batt feed, IGN feed and earths.

    Ive found 2jz-ge ones but not for the soarer, this is a 4 plug ecu and i cant find anything anywhere on any forum.

    Someone please help me, track day in 5 days

    Cheers

  2. #2
    RZN169R+2JZGTEVVTI+R151 Domestic Engineer madmont's Avatar
    Join Date
    Nov 2005
    Location
    Queensland
    Posts
    669

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    1JZ and 2JZ in the soarer run the same plugs into the ecus so possibly the same pinouts on the body plug
    http://soarercentral.com/sc-forum/me...nouts-2211.pdf
    Last edited by madmont; 02-10-2009 at 06:53 AM.
    Jealousy is a curse

  3. #3
    Junior Member Backyard Mechanic
    Join Date
    Jun 2006
    Location
    Tasmania
    Posts
    234

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    Hmm thanks for that, i will have to try it worst come to worst

    Would love to be sure though

    Thanks a lot man

  4. #4
    Junior Member Backyard Mechanic
    Join Date
    Jun 2006
    Location
    Tasmania
    Posts
    234

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    ok from what i a see the ecu doesn't need start signal to run?

    Maybe it just relys on the AT neutral switch?

  5. #5
    Junior Member Backyard Mechanic
    Join Date
    Jun 2006
    Location
    Tasmania
    Posts
    234

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    Using those ecu pinouts above i've wired the ecu in, only things i powered up was the +b, IGSW and batt terminal


    Anything else that needs it?

    The coil has no ingition and its not firing or anything obviously, im starting to think the ECU pinouts for the1jz are different

    Need help bad thanks

  6. #6
    RZN169R+2JZGTEVVTI+R151 Domestic Engineer madmont's Avatar
    Join Date
    Nov 2005
    Location
    Queensland
    Posts
    669

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    You should have m-rel going to the relay to supply power to the ecu which comes back through b and b1
    have you supplied 12v to the injectors?
    here is a wiring diagram
    http://www.1jzsoarer.net.nz/files/Soarer3.pdf
    Jealousy is a curse

  7. #7
    Junior Member Backyard Mechanic
    Join Date
    Jun 2006
    Location
    Tasmania
    Posts
    234

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    Well ive wired 12v to those terminals (provided that those pin outs posted at the top were right) just didnt use th m-rel pin to trigger it, dont think that will matter.
    I thought the ecu would supply the injectors?

    Do you have pin outs to go with those wirin diagrams so i can work these injectors out?

    Or seeing as the huge rush im in maybe you could be nice enough to tell me lol

    Cheers

  8. #8
    RZN169R+2JZGTEVVTI+R151 Domestic Engineer madmont's Avatar
    Join Date
    Nov 2005
    Location
    Queensland
    Posts
    669

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    You should have a wire running from the ignition to the injectors and igniter through one of the body plugs on the engine loom possibly a black/orange wire
    Jealousy is a curse

  9. #9
    Junior Member Backyard Mechanic
    Join Date
    Jun 2006
    Location
    Tasmania
    Posts
    234

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    Hey man i found a plug with thick blackorange wire, powred it up and now have spark. As far as i can work out injectors aren't clicking

    Any info on where to head from here?

  10. #10
    RZN169R+2JZGTEVVTI+R151 Domestic Engineer madmont's Avatar
    Join Date
    Nov 2005
    Location
    Queensland
    Posts
    669

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    Make sure you have 12v at the injectors take off a plug and measure the volts. If you have 12 v take plugs off injectors and make sure they click when you put 12v across them. They may be stuck shut from sitting for some time
    Jealousy is a curse

  11. #11
    Junior Member Backyard Mechanic
    Join Date
    Jun 2006
    Location
    Tasmania
    Posts
    234

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    No voltage at the injectors when the ignition is on but they click when i power them up

    Wonder if i missed anything at the ecu... or if i even used the right ecu pin outs lol.

    you'd think if they were wrong i wouldn't have spark though.

    Hmm any ideas guys, help is much appreciated car is ready for track this weekend apart from this littl hickup lol

  12. #12
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    Quote Originally Posted by skin View Post
    No voltage at the injectors when the ignition is on but they click when i power them up
    Maybe you haven't applied power to the injectors ?

    One pin will have 12V (measure from battery -VE to injector pin), the other pin will go back to the ECU (The ECU earths this pin to turn the injector ON).



    On the same plug that you connected Black-Orange wire to get spark I suspect there will be another wire that goes to the injectors to power them

    Hint: You can use a multimeter in Ohms / Resistance mode to trace back the wire from the injector to the plug it goes to

    Cheers
    Wilbo


    Cheers
    Wilbo
    Wilbo's Wiki (Includes 2JZ-GTE Wiring, etc! )

    Wilbo's JZA80
    Wilbo's JZZ12

  13. #13
    Junior Member Backyard Mechanic
    Join Date
    Jun 2006
    Location
    Tasmania
    Posts
    234

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    Runs like a champ, thanks fella's

  14. #14
    Senior Citizen Chief Engine Builder "Z" UTE's Avatar
    Join Date
    Nov 2005
    Location
    ACT
    Posts
    3,059

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    skin, what was the problem, which wires were wrong.

    cheers Chuck
    "What man can build, man can fix!"
    MS51Crown Coupe,
    GSV40R Aurion luxo tourer. One TA22 currently receiving some TLC prior to paint One RS56 Crown ute under construction, 2 x TA22's awaiting rebuilds. Toyota Crown RS47J ute in need of serious TLC. Toyota Crown Custom Wagon MS53 daily hauler stocko!

  15. #15
    Junior Member Backyard Mechanic
    Join Date
    Jun 2006
    Location
    Tasmania
    Posts
    234

    Default Re: 2zj-ge Ecu pinouts and wiring diagram

    nothing was wrong just missing couple of things,

    Its not actually runnig real good lol misses bad under load and doesn't even rev properly

Similar Threads

  1. JZS155 Crown 2JZGE VVTi Wiring Diagram needed - HELP
    By takai in forum Tech and Conversions
    Replies: 21
    Last Post: 30-04-2013, 06:28 AM
  2. Mx 83 wiring diagram and ECU pinouts.
    By crowncustom in forum Tech and Conversions
    Replies: 2
    Last Post: 11-07-2009, 07:38 PM
  3. 2JZGTE VVTi wiring diagrams and ECU pinouts
    By 98SZR in forum Tech and Conversions
    Replies: 2
    Last Post: 02-07-2009, 11:55 AM
  4. 5VZ-FE Auto Pinouts & wiring Diagram wanted
    By TheToyman75 in forum Tech and Conversions
    Replies: 1
    Last Post: 27-02-2007, 04:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •